Russian

German

French |

help

Add to favorite

Favorite products

Description

Chemical Materials & Products / Adhesive Materials /

good adhesive performance silicone sealant (хорошие адгезионные характеристики силиконовый герметик)

Zoom in

Send Request

about this service

Producer information

Company:
Guangzhou Usilicone chemical material Co.,Ltd

Address:
Room 1206, Science Avenue 97, Luogang District

Phone:
+86-769-88888312

good adhesive performance silicone sealant

Before the curingAppearanceWhite pasteRelative density1.60～1.70(g/cm3)Surface drying time≤15(min)After the curingTensile strength≥1.5（MPa） Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35～45(Shore A) Temperature Range-60～200(℃)Volume resistivity2.2×1015 (Ω·cm)Dielectric strength20 (kV/mm) Thermal conductivity≥0.8［W/（m·k）］ Dielectric constant3.12(1.2MHz) Packaging: 100mL / tube,100tubes / box.

Add to Basket

Web address

Other goods of this manufacturer :

good adhesive silicone sealant for LED
	INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so

good adhesive silicone sealant for LED
	METHOD OF OPERATIONINSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on

good adhesive silicone sealant for LED
	Before The Curing Appearance Semi Transparent And Semi FlowSpecific Gravity0.95～1.05 (g/cm3)Surface Drying Time ≤15 (min)Curing Time 3~7 daysAfter The CuringTensi

good adhesive silicone sealant for LED
	Before The Curing Appearance Semi Transparent And Semi FlowSpecific Gravity0.95～1.05 (g/cm3)Surface Drying Time ≤15 (min)Curing Time 3~7 daysAfter The CuringTensi

good heat resistance of power supply potting sealant
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

inverters silicone potting sealant with waterproof
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

LED bar silicone potting sealant with damp-proof
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

LED bulb silicone sealant
	INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so

LED power modules silicone potting sealant with non-toxic
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

Likewise in category "Adhesive Materials":

Taiwan.ru service usage rules

eHouseHolding.com