good adhesive silicone sealant for LED

Before The Curing Appearance Semi Transparent And Semi FlowSpecific Gravity0.95～1.05 (g/cm3)Surface Drying Time ≤15 (min)Curing Time 3~7 daysAfter The CuringTensile Strength ≥1.8 (MPa)Elongation At Break ≥400 (%)Shear Strength ≥1.2 (MPa)Hardness15～25 (Shore A)Lampholder Torque ﹥2.5 (N·m)The Temperature Range-60～200 (℃)Volume Resistivity2.6×1015(Ω·cm)Dielectric Constant3.12 (1.2 MHz)Dielectric Strength 20 (KV/·mm)Sample: 100mL / tube, 100tubes / box; 300mL / tube, 25tubes / box.

Add to Basket

Web address

Other goods of this manufacturer :

good adhesive silicone sealant for LED
	Before The Curing Appearance Semi Transparent And Semi FlowSpecific Gravity0.95～1.05 (g/cm3)Surface Drying Time ≤15 (min)Curing Time 3~7 daysAfter The CuringTensi

good heat resistance of power supply potting sealant
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

inverters silicone potting sealant with waterproof
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

LED bar silicone potting sealant with damp-proof
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

LED bulb silicone sealant
	INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so

LED power modules silicone potting sealant with non-toxic
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

low viscosity silicone sealant
	NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it

non-corrosion for materials silicone sealant
	1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti

non-corrosion silicone sealant
	After the curingTensile strength≥1.5（MPa） Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35～45(Shore A) Temperature Range-60～200(℃)Volume resistivity2.2×10