Russian

German

French |

help

Add to favorite

Favorite products

Description

Chemical Materials & Products / Adhesive Materials /

LED power modules silicone potting sealant with non-toxic (LED Модули заливки силиконовый герметик с нетоксичными)

Zoom in

Send Request

about this service

Producer information

Company:
Guangzhou Usilicone chemical material Co.,Ltd

Address:
Room 1206, Science Avenue 97, Luogang District

Phone:
+86-769-88888312

LED power modules silicone potting sealant with non-toxic

Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min) (Adjustable)Curing Time3～5(h)After The Curing Hardness 40~50(Shore A)Dielectric Strength ≥20(kV/mm)Dielectric Constant3.12(1.2MHz)Thermal Conductivity ≥0.6[W/m.k]Volume Resistivity ≥1.0×1014(Ω·cm)Specific Gravity 1.56±0.02(g/cm3)Flammability RatingUL94 V-0 •20kg/set（A10kg+B10kg), packaging with bucket.

Add to Basket

Web address

Other goods of this manufacturer :

low viscosity silicone sealant
	NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it

non-corrosion for materials silicone sealant
	1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti

non-corrosion silicone sealant
	After the curingTensile strength≥1.5（MPa） Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35～45(Shore A) Temperature Range-60～200(℃)Volume resistivity2.2×10

quake-proof silicone sealant for solar power
	1. Features ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola

RTV-1 Sealant with excellent thermal conduction
	NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it

silicone gel for power potting
	INSTRUCTIONS1、A, B glue mix according to the weight of the 1:1 ratio，and only after the row of bubble it can be used.In order to improve the bubble velocity,empty after row and bubble in the

silicone gel for power potting
	NOTE There are some materials, such as chemical additives, curing agent and plasticizer can inhibit the curing of our glue.These materials include: •Org

silicone gel with operating repeatedly
	Before the curing Appearance

silicone gel with operating repeatedly
	Effectively prolong the service life of electronic componentsSilicone sealant has superior thermal conduction and bonding property.it not only can fixed the electroniccomponents, make

Likewise in category "Adhesive Materials":

Taiwan.ru service usage rules

eHouseHolding.com