Producer information
Company:
Apt Prosper Technology Co., Ltd. |
| |
Address:
21G, Caihui Building, Caihong Xindu, South Caitian Road, Futian, Shenzhen, Guangdong, China (Mainland) Zip: 518026 |
| |
Phone:
+86-755-82915951 |
|
10/100M Media Converter
Name: 10/100M self-adapt media converterType: APT-103S34OCScale: 10/100M media converterAPT-103S34OC dual fiber dual-direction fiber optic media converter:The converterhave been tested and found to comply with the limits for a class A digital device,pursuant to part 15 of the FCC rules. These standards are designed to providereasonable protection against harmful interference when these devices are operatedin a commercial environment. These devices can use, generate and radiate radiofrequency energy and may cause harmful interface to radio communications unlessinstalled in accordance with User`s Guide. Operation of this device in a residentialarea is likely to cause harmful interface which will make the user responsiblefor the appropriate remedial action at this expanse.These are class A products. In a domestic environment these products may cause radiointerface in which cause the user will need to consider adequate preventativemeasures.Technical parameters:1. Standards: IEEE802.3u, Fast Ethernet 10/100Base-TX and 100Base-FX2. Connector: RJ45-UTP and Fiber SC3. LED: Power FDX/Col, FX-Link/Act, TXLink/Act, FX100. TX1004. Data transfer mode: 10/100Mbps5. Duplex mode: full or half duplex mode6. Power requirement: AC 100-260V DC1A@+5V7. Ambient temperature: 0 - 70°C8. Humidity: 5% - 90% (non-condensing)9. Cable: Cat. 5 UTP cable10. Fiber: multi-mode11. Size: 94mm x 70mm x 26mm (L x W x H)Specifications:1. Connector type: SC2. Typical distance: 40km3. Fiber type: single mode4. Wavelength: 1,310nm5. Min. TX PWR: -15.0dBm6. Max. TX PWR: -7.0dBm7. Sensitivity: -32.0dBm8. Link budget: 17.0dBmNotes:1. Optical port working mode is 100M full-duplex, LAN port is auto negotiation2. When twisted-pair interface initialization, warrant to check couple equipment`sstate to set its state, if can`t check out opponent state that the state is uncertainty3. Don`t use your unaided eyes to look at the TX fiber transmit port when the mediaconverter`s state is electrifying4. Please put dustproof cover on fiber optic media converter when is not used5. When the product connecting with other equipment (router, switch, hub, NIC), theinterconnection equipment`s optical interface`s speed and mode must be consistent(multimode and single mode), interconnection equipment`s LAN port`s speed shouldmismatch (100Base-TX/100Base-T)6. This product must pay attention to connecting origin end media converter`s TXport`s wire jumper with connecting far end media converter`s RX port. Origin endmedia converter`s RX port`s wire jumper must be connected with far end TX port.Don`t connect it wrongly
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
