Информация о производителе
Компания:
Apt Prosper Technology Co., Ltd. |
| |
Адрес:
21G, Caihui Building, Caihong Xindu, South Caitian Road, Futian, Shenzhen, Guangdong, China (Mainland) Zip: 518026 |
| |
Телефон:
+86-755-82915951 |
|
.
Name: 10/100M self-adapt media converterType: APT-103S34OCScale: 10/100M media converterAPT-103S34OC dual fiber dual-direction fiber optic media converter:The converterhave been tested and found to comply with the limits for a class A digital device,pursuant to part 15 of the FCC rules. These standards are designed to providereasonable protection against harmful interference when these devices are operatedin a commercial environment. These devices can use, generate and radiate radiofrequency energy and may cause harmful interface to radio communications unlessinstalled in accordance with Users Guide. Operation of this device in a residentialarea is likely to cause harmful interface which will make the user responsiblefor the appropriate remedial action at this expanse.These are class A products. In a domestic environment these products may cause radiointerface in which cause the user will need to consider adequate preventativemeasures.Technical parameters:1. Standards: IEEE802.3u, Fast Ethernet 10/100Base-TX and 100Base-FX2. Connector: RJ45-UTP and Fiber SC3. LED: Power FDX/Col, FX-Link/Act, TXLink/Act, FX100. TX1004. Data transfer mode: 10/100Mbps5. Duplex mode: full or half duplex mode6. Power requirement: AC 100-260V DC1A@+5V7. Ambient temperature: 0 - 70°C8. Humidity: 5% - 90% (non-condensing)9. Cable: Cat. 5 UTP cable10. Fiber: multi-mode11. Size: 94mm x 70mm x 26mm (L x W x H)Specifications:1. Connector type: SC2. Typical distance: 40km3. Fiber type: single mode4. Wavelength: 1,310nm5. Min. TX PWR: -15.0dBm6. Max. TX PWR: -7.0dBm7. Sensitivity: -32.0dBm8. Link budget: 17.0dBmNotes:1. Optical port working mode is 100M full-duplex, LAN port is auto negotiation2. When twisted-pair interface initialization, warrant to check couple equipmentsstate to set its state, if cant check out opponent state that the state is uncertainty3. Dont use your unaided eyes to look at the TX fiber transmit port when the mediaconverters state is electrifying4. Please put dustproof cover on fiber optic media converter when is not used5. When the product connecting with other equipment (router, switch, hub, NIC), theinterconnection equipments optical interfaces speed and mode must be consistent(multimode and single mode), interconnection equipments LAN ports speed shouldmismatch (100Base-TX/100Base-T)6. This product must pay attention to connecting origin end media converters TXports wire jumper with connecting far end media converters RX port. Origin endmedia converters RX ports wire jumper must be connected with far end TX port.Dont connect it wrongly
|
336x280 banner
|
336x280 banner
|
|
помощь**
Добавить в избранное
Отложенные товары
