Connecting rods are made of open / closed die from hot steel forging process for heavy duty application, also made through casting from spheroidal-graphite (SG) iron for light duty application. Small-end fitted with shell bushing or plain for light application and Big-end are normally either serrated or grooved and tongue joints which is having bolts either sides, a pair of split bearing is used inside Big-end housing bore.
Valve are made from steel (bimetal, magnetic and non magnetic), valve stem are chrome plated to increase wear resistance and seat are stellited (seat hard forced) to get high hot hardness.
Cylinder Liners / Sleeves manufactured through cast-iron process, in Grey cast-iron. It has enough hardness, toughness strength and wears resistance. They are of two types` Dry liners / sleeves and We
The piston ring is made from pig iron which is known as high quality cast iron with composition of carbon, chromium, nickel, and molybdenum. Piston rings are compressor ring, control (sraper) ring and
The pistons are made of aluminum alloy through casting process. The ability of the cast material is having high strength, strength for high hot resistance for surface abrasion, better thermal conducti
They are made from cast iron through casting process also alloys (i.e. brass, bronze etc.) and fitted on the head to give friction less operation to the valve.
A very highly critical component which is used for conveying of oil / water to the engine during operation and keeps the temperature low. They are pinion and pulley types, works in parallel with engin
We take this opportunity to introduce ourselves as leading manufacturers / exporters of engine parts i. E. Liner-sleeves, pistons, piston rings, connecting rods, valves, valve guides, valve tappets, v
Liner-Sleeves, Pistons, Piston Rings, Connecting Rods, Valves, Valve guides, Valve Tappets, Valve Seats, Bearings and Other parts. We carry these parts for light duty e.g. universal sleeves, for cars
Bearigs and Bushes are normally made of strips having Bi-metal (steel backed copper / lead) of low carbon steel and single metal with thin outer coating. These are used to minimize the friction betwee
help
Add to favorite
Favorite products
