Cylinder Liners / Sleeves manufactured through cast-iron process, in Grey cast-iron. It has enough hardness, toughness strength and wears resistance. They are of two types` Dry liners / sleeves and Wet liners / sleeves which are press fit or split fit in to the engine. The allowance for the fitment between liner and bore holes is 0.050 to 0.075 mm. these are available in Semi-Finish (SF) and Fully-Finish (FF) condition. The available ranges are suitable for light, medium and heavy duty applications.
The piston ring is made from pig iron which is known as high quality cast iron with composition of carbon, chromium, nickel, and molybdenum. Piston rings are compressor ring, control (sraper) ring and
The pistons are made of aluminum alloy through casting process. The ability of the cast material is having high strength, strength for high hot resistance for surface abrasion, better thermal conducti
They are made from cast iron through casting process also alloys (i.e. brass, bronze etc.) and fitted on the head to give friction less operation to the valve.
A very highly critical component which is used for conveying of oil / water to the engine during operation and keeps the temperature low. They are pinion and pulley types, works in parallel with engin
We take this opportunity to introduce ourselves as leading manufacturers / exporters of engine parts i. E. Liner-sleeves, pistons, piston rings, connecting rods, valves, valve guides, valve tappets, v
Liner-Sleeves, Pistons, Piston Rings, Connecting Rods, Valves, Valve guides, Valve Tappets, Valve Seats, Bearings and Other parts. We carry these parts for light duty e.g. universal sleeves, for cars
Bearigs and Bushes are normally made of strips having Bi-metal (steel backed copper / lead) of low carbon steel and single metal with thin outer coating. These are used to minimize the friction betwee
All the parts i.e. Sleeve, Piston, Piston Ring, bearing, bushes, connecting rod etc. are made by using best technology and quality process. We are able to make any range for compressor parts, at prese
Connecting rods are made of open / closed die from hot steel forging process for heavy duty application, also made through casting from spheroidal-graphite (SG) iron for light duty application. Small-
help
Add to favorite
Favorite products
