Waterproofing Construction Materials

#9345 Mixing Ratio:2:1 Working Time(min./100g):120min. Curing Time:24hrs Viscosity(cps/25 ):1000 Characteristics:Low viscous injection type epoxy resin.100% solid content. No shrinkage and cracks appear after full cure.Strong bonding strength. Applications: For bonding/repairing/sealing of fine gap by injection. #9156 Mixing Ratio:1:1 Working Time(min./100g):20min. Curing Time:45min. Viscosity(cps/25 ):Paste Characteristics:Water-base,high coating strength,fast cure for surface repair. Applications:Surface repair with #9345 senlart,repair for small leakage. WS Mixing Ratio:--- Working Time(min./100g):--- Curing Time:--- Viscosity(cps/25 ):--- Characteristics:Expansion type instant waterstop.Excellent resistance to weather and pressure. Swelling a little bit after full cure. Applications: For instant waterstopig when leakage with large amount of water appears. #908 Mixing Ratio:2:1 Working Time(min./100g):30min. Curing Time:3hrs Viscosity(cps/25 ):4000 Characteristics: Fast harden High hardness. High physical strength. Excellent resistance to acid, alkali, pressure and bending. Applications:For coating resistant to acid/alkali, under coating of ground materials and high-strength construction.

Add to Basket

Web address

Other goods of this manufacturer :

Waterproofing Construction Materials
	Bac-315 Mixing Ratio:one-part Working Time(min./100g):20min/skin dry Curing Time:24hr/1mm Viscosity(cps/25 ):4000 Characteristics: Anit-bacterial silicone sealant, elastomer. Excellent temperature,so

Waterproofing Construction Materials
	#3260 Mixing Ratio:one-part Working Time(min./100g):30min/skin dry Curing Time:4hr/1mm Viscosity(cps/25 ):20000 Characteristics:Silicone base 100% solid content.No toxicity and odor.Sate application.

Waterproofing Construction Materials
	ED Mixing Ratio:one-part Working Time(min./100g):10min/skin dry Curing Time:4hr./0.5mm Viscosity(cps/25 ):100~200 Characteristics:Mixing with concrete to improve bonding and inner strength. Especiall

Anaerobic Adhesives (Fast cure Type)
	Setting time:30sec.~3min. Shear strength up to 250kg/cm2. Temp-resistance up to 130~180 . For quick work on assembling line.

Anaerobic Adhesives (General type.)
	(1):General thread locker.Setting time:2~5min.Torque up to 150kg/cm2. Temp-resistance up to 120 . For thread locking and bearing retaining. Strong bonding strength to non-metal material. (2):Non-dry

Anaerobic Adhesives (High-strength lock)
	Excellent resistance to chemicals.Temp.resistance up to 150 . Torque up to 450kg/cm2.Shear strength up to 350kg. Excellent adhesion even when applying on oily parts. For high-strength locking,or asse

Anaerobic Adhesives (High-temp. resistance.)
	Pressure-resistance up to 200kg/cm2. High viscosity. Good gap-filling capability. Easy disassembly and cleaning. For sealing of flange pipes.

Anaerobic Adhesives (Mid-strength bonding.)
	Suitable for sealing and retaining. Soft-tough and can be slightly twisted after full cure. As adjustable locker,or for medium strength bonding, such as thread locking,pipe assembling,or key locking.

Anaerobic Adhesives (Resistance to heat and cold.)
	Can be used under 200 for long and still remain stable. Excellent resistance to both heat and cold. For assembling parts under high operating temp., such as in valve industry,heat exchanger tubes...