Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Chemical Materials & Products /  Adhesive Materials / 
Send Request

about this service

Producer information
Company:
PERMA ENTERPRISE COMPANY LIMITED
 
Address:
3Fl-2 No.322 Sec.4 Chung Hsiao E. Rd. Taipei
 
Phone:
+886-2-27733181

Waterproofing Construction Materials


Bac-315 Mixing Ratio:one-part Working Time(min./100g):20min/skin dry Curing Time:24hr/1mm Viscosity(cps/25 ):4000 Characteristics: Anit-bacterial silicone sealant, elastomer. Excellent temperature,solvents and weather resistance. Approved by EPA and FDA. Applications: Sealing/Bonding for kitchen, bathroom, that rapid growth of mildew or microbe. Sealing/Lining for biochemical factory. Bac-231 Mixing Ratio:2:1 Working Time(min./100g):50min. Curing Time:4hr Viscosity(cps/25 ):2000 Characteristics: Anti-bacterial epoxy glue, rigid lustering, high cohesion. Approved by EPA and FDA. Applications: Can be applied to floor coating for food, biochemical, hospital laboratory or factory or other anti-bacteria required environment. Bac-735D Mixing Ratio:one-part Working Time(min./100g):10min/skin dry Curing Time:24hr/1mm Viscosity(cps/25 ):5000 Characteristics:Anti-bacterial PU glue,solvent-base,elastomer,high bonding strength easy-to-use. Applications: Donding/Coating for most material or large area.Lining resin.

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
Waterproofing Construction Materials
Waterproofing Construction Materials (Waterproofing Construction Materials)
#3260 Mixing Ratio:one-part Working Time(min./100g):30min/skin dry Curing Time:4hr/1mm Viscosity(cps/25 ):20000 Characteristics:Silicone base 100% solid content.No toxicity and odor.Sate application.
Waterproofing Construction Materials
Waterproofing Construction Materials (Waterproofing Construction Materials)
ED Mixing Ratio:one-part Working Time(min./100g):10min/skin dry Curing Time:4hr./0.5mm Viscosity(cps/25 ):100~200 Characteristics:Mixing with concrete to improve bonding and inner strength. Especiall
Anaerobic Adhesives (Fast cure Type)
Anaerobic Adhesives (Fast cure Type) (Anaerobic Adhesives (Fast cure Type))
Setting time:30sec.~3min. Shear strength up to 250kg/cm2. Temp-resistance up to 130~180 . For quick work on assembling line.
Anaerobic Adhesives (General type.)
Anaerobic Adhesives (General type.) (Anaerobic Adhesives (General type.))
(1):General thread locker.Setting time:2~5min.Torque up to 150kg/cm2. Temp-resistance up to 120 . For thread locking and bearing retaining. Strong bonding strength to non-metal material. (2):Non-dry
Anaerobic Adhesives (High-strength lock)
Anaerobic Adhesives (High-strength lock) (Anaerobic Adhesives (High-strength lock))
Excellent resistance to chemicals.Temp.resistance up to 150 . Torque up to 450kg/cm2.Shear strength up to 350kg. Excellent adhesion even when applying on oily parts. For high-strength locking,or asse
Anaerobic Adhesives (High-temp. resistance.)
Anaerobic Adhesives (High-temp. resistance.) (Anaerobic Adhesives (High-temp. resistance.))
Pressure-resistance up to 200kg/cm2. High viscosity. Good gap-filling capability. Easy disassembly and cleaning. For sealing of flange pipes.
Anaerobic Adhesives (Mid-strength bonding.)
Anaerobic Adhesives (Mid-strength bonding.) (Anaerobic Adhesives (Mid-strength bonding.))
Suitable for sealing and retaining. Soft-tough and can be slightly twisted after full cure. As adjustable locker,or for medium strength bonding, such as thread locking,pipe assembling,or key locking.
Anaerobic Adhesives (Resistance to heat and cold.)
Anaerobic Adhesives (Resistance to heat and cold.) (Anaerobic Adhesives (Resistance to heat and cold.))
Can be used under 200 for long and still remain stable. Excellent resistance to both heat and cold. For assembling parts under high operating temp., such as in valve industry,heat exchanger tubes...
Instant adhesives (Excellent impact resistance)
Instant adhesives (Excellent impact resistance) (Instant adhesives (Excellent impact resistance))
#747 Low viscosity/penetrative type.Excellent impact resistance.Tough type. #130 Mid-viscosity type.Excellent impact-resistance.Tough type. CN-6 High bonding strength.Medium-cure speed type. Excellen

Likewise in category "Adhesive Materials":
Epoxy Putty Adhesive
Epoxy Putt...
Injection cartridge ( chemical mortar )Epoxy resin
Injection ...
injection cartridge ( chemical mortar ) Vinylester Styrenefree
injection ...
Epoxy Putty Adhesive
Epoxy Putt...
HOTMELT MOULDING MACHINE
HOTMELT MO...
Polyurethane Sports Ground Floor Coating
Polyuretha...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com