Address: No. 8, 5th Road, Songpingshan Factory Zone, Hi-Tech Industrial Park, Nanshan, Shenzhen, Guangdong, China (Mainland) Zip: 518057
Phone: +86-755-86161032
3D Laser Engraving Machine
Product Name: 3D Laser Engraving MachineModel Number: PHANTOM-IPlace of Origin: ChinaFeatures:This system is applied to produce crystal artwork, can engrave 2D or 3D picture intransparent materials. It adopts the processing combination of high speed scannerand worktable, and the working frequency increases a lot. It is about 1,000Hz (means1,000 points per second). Furthermore, the points in the materials are very smallso that it can make artwork more exquisite and the picture can be appreciatedclearly in any positions.Applications:engraving 2D or 3D picture in transparent materialsSpecifications:1) Wavelength: 532nm2) Stability of laser power: 3% (8 hours working continuously)3) Repeat frequency: 1kHz4) Marking scope: 80 x 80 x 80mm5) Marking speed: 50,000 dots/min6) Input power: 1.5kW7) Electrical source: 220V 50Hz 8-20A8) Dimensions: 1,100 x 600 x 1,250mm9) Weight: 240kg10) Cooling system: water cooling
PHANTOM-I is used to produce crystal artwork, and can engrave 2D or 3D pictures in any transparent material except tempered glass.Traditional 3D glass markers use worktable processing, with a maximum
Product Name: Laser Cutting MachinePlace of Origin: ChinaFeatures:The cutters of this model have robust functions, combines the bitmap engraving, vectorcutting and laser drilling in one unit. This sys
Product Name: Laser Cutting MachineModel Number: CB1206-100Place of Origin: ChinaFeatures:Started by high-speed servo motor, has slowdown sophisticated belt drive, used fixed cutting table. Go-through
Product Name: Laser Cutting MachineModel Number: CB0906Place of Origin: ChinaThe cutter of this model has robust functions, combines the bitmap engraving, vectorcutting and laser drilling in one unit.
Features:Started by high-speed servo motor, has slowdown sophisticated belt drive, used fixed cutting table. Go-through design on Y direction can cut long article. Except the working table, other comp
Features:1) 150W maximum laser output power2) Gantry movement structure3) pilot laser track4) belt bearing transmitting structure5) Raise and lower the laser head to focus6) Max. cutting speed: 500mm/
ApplicationThis model is suitable for cutting and marking armor plating, plastic, wood, composite materials, and die cutting board.System characteristics:1) Collocate standard high power CO2 laser TK1
Product Name: Laser Engraving MachineModel Number: CO2-S100XPPlace of Origin: ChinaFeatures:Power is controlled by software and can be adjusted. The cost of the process is low with no consuming materi
help
Add to favorite
Favorite products
