DING TABLE COLUMN STANDER TURNING LATHE

This machine is suitable for cutting dinning table column stander which max.,Length is 620mm and the range of the diameter is from max. 300mm to min.100mm. It is also suitable f,or cutting similar large workpieces.,Except the workpiece loading and unloading is manually operated, the other ,systems are full automatic operation. They are drive by hydraulic pressure.,Besides one round shaving knife, this machine also installs U-knife and V-lnife ,each for traversal copying cutting.,The formed knife`s cutting angle is in 20 degree .The carriage`s feeding movement is very stable and,, the cutting dimensions are very accurate.,The loaction of workpiece feeding is very accurate. Both copying cutter`s carriage and formed cutter,`s are easy to be adjusted.,The spindle motor of this machine is 7.5HP and pump motor is 3HP.,The capacity of the oil tank is 90 liters.

Add to Basket

Web address

Other goods of this manufacturer :

FULL HYDRAULIC HOPPER FEED BACK KNIFE TURNING LATHE
	Coyer Back Knife Turning Lathe delivers the dependable and rugged service your requite.

FULL HYDRAULIC TURNING LATHE
	THE MACHINE IS ESPECIALLY DESIGNED FOR PROCESSING WOOD ,WITH A LENGTH OF 420mm AND DIAMETER OF 130mm.,THE MACHINE RUNS AUTOMATICALLY AND USES HYDRAULIC POWER ,AS IT`S DRIVING FORCE.,THE MACHINE PERFO

HYDRAULIC COPYING LATHE
	Saves cutter cost ,saves time for production setup,Convenient to use online with a production line or make changes to production.

HYDRAULIC STRIGHT AND SPIRAL GROOVE TURNING LATHE
	The machine is suitable for cutting profiles and sprial grooves on a straight and,tapered turning.

SEMI-AUTO HYDRAULIC WOOD LATHE
	1.This machine is suited to manufacture wood pieces below 420 mm (length) , and 130 mm (diamete,r)., 2.The rough pattern knifde seat of this machine is manual operation,but there, are hydraulic drive