H3010 intermediate primer (1k)Composing:1k primer (quick-drying intermediate coating paint) is a mixture of all kind of synthetic resin, pigment, filling, antisetting additives, aids and solvent.Characteristics:H3010 1k intermediate primer has good filling capability with primer and poly-putty, quick-drying in the warm room, good grinding and good luster (could reach 5-15% ) , prevent the top-paint filter inside, have a good adhesive force with top-paint, high hardness and waterproof.H3010 1k intermediate primer has a good hardness but flexibility, applies principally to the small size car with not finish the top-paint.Field of application:Application for all kind of car, bus and metal etc. as a quick-dry sealing intermediate coating, also be used as a quick-dry single-component repair coating.Reference for construction and notes:1. Suitable for spraying. Use poly-putty and sand the surface down before spraying.2. Use thinner and tiana water to dilute and wash the tool. The ratio of thinner is: 15~35 percent, viscosity: 14~18 second / (t-4, 25 degree centigrade) .3. When in winter or humidity is more than 90% , should use the desiccant (white water) , and the dosage of desiccant is about 25~45 percent, or may cause poor viscosity in the middle layer, mist, even cause some bubble on the surface. Must not use the bad quality thinner to dilute this product.4. Suitable for using on the surface of 2k primer and poly-putty, do not use on the surface of the paint of alkyd, epoxy fat, phenoilc aldehyde.5. The storage life is one year from the date of production (if it is beyond the storage life, please confirm according to the standard inspection; if the quality is still ok, you can used it continuously) .Packing & storage:Packing specification: 1l, 4l printing iron drumsStorage condition: 5-35 degree centigrade, keep in seal and cool dry ventilation place.
H206 polyester putty zink (2k)Composing: it is made from unsaturated polyester resin, modified resin, pigment, various filling, anti sediment materials, addition agent and solvent, and cream hardener
307 light weight polyester puttyIngredients:Unsaturated polyesters resins, modified resin, color pigment, stuffing, anti sediment materials, auxiliary agent and firming agent mixing ratio 100:2.The as
CPM900 Putty:1) Two Pack, fast drying polyester putty2) Very high filling ability3) Good adhesion4) Easy to sand5) Three versions:A) Fast dryingB) StandardC) Slow drying6) Substrate: Sanded, de-grease
M23# unsaturated polyester resinIngredients:Unsaturated acid, saturated acid, diol, polyalcohol, modified resin, special additive, and assistant pyrosynthesis.Characteristics:Polyester putty that it i
M23# Air Drying Unsaturated Polyester Resin for produce car body filler (putty)Ingredients:Unsaturated acid, Saturated acid, Diol, Polyalcohol, Modified Resin, Special Additive, and Assistant pyrosynt
H2210# pinhole-filling super fine putty (1k NC putty)Ingredients:It is made from synthetic resin, fiber resin, pigment, various filling, anti sediment materials, addition agent and solvent.Characteris