Address: Inside Zhonggu Town Industrial Park, Qingpu, Shanghai, China (Mainland)
Phone: +86-21-68453855 +50816885
CNC EPS Shape Cutting Machine(QGF-3000)
Features:1) By controlling the synchro running of X-axis (the transfer strap which carries EPS block) and Y-axis (the hot wire rack which carries resistor wires) to compound the graph, meanwhile uses the wires to cut EPS products into all kinds of shapes2) Provides two methods to input product graphs into the computer: draw directly through the AutoCAD software or scan through the painting panel3) Single-line CNC shape cutting machine is used to cut products with large capacity or small amount4) Multi-line CNC shape cutting machine is used to cut products with small capacity or large amount. Resistor wire cutting system can use up to 20 wires simultaneously. All wires run parallelly after inputting the graphs into the computer,which cuts up to 20 complex two-dimension shapes at one time5) When the machine is equipped with rotation device, it can realize three-dimension cutting
Main features:1. EPS beads enter the fluidized beds (optional) through charging material and expansion , then go into the aging silo through transporting fan to finish their auto-cycle expansion.2. fe
Features:1) EPS beads enter the fluidized beds (optional) through charging material andexpansion, then go into the aging silo through transporting fan to finish theirauto-cycle expansion2) Feeding sys
Features:1) Uses PLC programmable controller and touch screen to finish the auto-cycleprocess of opening-closing mold, feeding, heating, heat preservation, cooling,demolding and releasing2) According
Main features:1.Use PLC programmable controller and touch screen to finish the autocycle process of opening-closing mold, feeding, heating, heat preservation, cooling, demolding and releasing.2.D type
Main features:1.Use PLC programmable controller and touch screen to finish the autocycle process of opening-closing mold, feeding, heating, heat preservation, cooling, demolding and releasing.2.Use au
Features: 1) Uses PLC programmable controller and touch screen to finish the auto-cycle process of opening-closing mold, feeding, heating, heat preservation, cooling,demoulding and releasing2) Uses au
Features:1) Uses PLC programmable controller and touch screen to finish the auto-cycle process of opening-closing mold, feeding, heating, heat preservation, cooling,demoulding and releasing2) Uses aut
Main features:1. Using in EPS recycling.2. Separate the EPS block at the joint, making the beads uniform, filled, dustless through crushing and sieving. Mix with new beads to remold and reproduce EPS
Features:1) Used for EPS recycling2) Separate the EPS block at the joint, making the beads uniform, filled, dustlessthrough crushing and sieving, and mixing with new beads to remold andreproduce EPS p
Likewise in category "Plastic Processing Machinery":
help
Add to favorite
Favorite products
