|
|
Automatic Blow Molding Machine (with Preform Feeding)
Settings:1) PLC color display: OMRON (Japan)2) Pneumatic parts: FESTO (Germany)3) Blowing valve: American PARKER4) Other electric parts are all world-famous brandZQ22-D series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only.ZQ22-D is of one cavity and the maximum cavity of the bottles is 600ml, 1.5Land 5L. It can blow various bottles in shapes: carbonated, mineral, pesticide,cosmetics, wide-mouth, hot filling, and other packing containers, which is madeof plastic of crystalline type, such as PET, PP, etc.Compared with ZQ22-2D series, ZQ22-D series has no automatic conveyer, so itcan`t transfer performs automatically, but requires labors to put performs intopreheater. The distinctive feature of the ZQ22-D is as follows: it has saved thecost to the maximum extent; it has lower rejection rate, higher production, andmore stable performance than the semi-automatic one, and moreover, it is easyto run. Therefore, it will take the place of the semi-automatic blow-moldingmachine.Features:1) Stable performance with advanced PLC2) Strong penetrability and good and swift distribution of the heat by lettingthe bottles rotate by itself and revolute in the rails simultaneously in theinfrared preheater3) High adjustability to enable the preheater to preheat performs in shapes byadjusting the light tube and the length of the reflecting board in thepreheating area, and eternal temperature in the preheater with an automaticthermostatic apparatus4) High safeties with security automatic-locking apparatus in each mechanicalaction, which will make the procedures turn into the state of safety in case ofa breakdown in certain procedure5) No contamination and low noise with the air cylinder to drive the actioninstead of the oil pump6) Satisfaction with different atmospheric pressure for blowing and action bydividing the blowing and action into three parts in the air pressure diagram ofthe machine7) Strong clamping force with high pressure and double crank links to lock themold8) Two ways of operating: automatic and manual9) Safe, reliable, and unique design of the position of valve to make the airpressure diagram of the machine easier to understand10) Low cost, high efficiency, easy operation, easy maintenance, etc, due toautomatic technological process11) Ideal effect of the chilling with the chilling system12) Easy installation and starting13) Low rejection rate: less than 0.2 percentSpecifications:1) Cavities: 12) Product material: PET3) Container volume: 0.35 - 1.5L4) Theoretical output: 2,800 - 3,000pcs/h5) Clamping force: 300kn6) Mould opening stroke: 80 - 250mm7) Max. mould plate dimension: 420mm x 500mm8) Max. mould thickness: 200mm9) Main machine dimensions: 3.58 x 1.73 x 2.20m10) Main machine weight: 3.5MT11) Conveyer dimensions: 2.00m x 1.05m x 2.18m12) Conveyer weight: 0.4MTOuter packing:Wooden case
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
