Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Chemical Materials & Products /  Chemical Reagents / 
Send Request

about this service

Producer information
Company:
Yuqing Water Purifying Materials Co., Ltd.
 
Address:
Guqiao Village, Heluo Town, Gongyi, Henan, China (Mainland)
 
Phone:
+0086-371-65528428

Aluminum Chloride Hexahydrate


Product Name: Aluminum Chloride HexahydratePlace of Origin: ChinaProduct nature: Liable to be exposed to moisture, non-combustible, nontoxic, easilysoluble in water, alcohol, ether and glycerol, aqueous solution show acidity,decomposition temperature of 100 Degree , and give out chlorine hydride when thermaldecomposition.Application:Mainly used for treatment of drinking water, and make better effect especially forthe treatment of low temperature, low turbidity and alkaline water. Also the intermediateproduct for manufacturing poly aluminium chloride for the substituteof hydrochloric acid, which can reduce pollution.Production process of manufacturing liquid PAC with Crystal aluminum chlorideCrystal aluminum chloride- Water dilution- Calcium aluminate powder- Polymerisation-Finished liquid product1 ton of Crystal aluminum chloride, mixed with more or less 700 Kg calcium aluminatepowder, can yield 6-7 tons of 8-10% liquid PAC.Features:1. Free from water, dust and atmosphere pollution, for use of crystal aluminiumchloride instead of directly using of hydrochloric acid.2. Uses of crystal aluminium chloride yield less offscourings than other materialssuch as bauxite, aluminium powder, etc., which can decrease labor contentand increase production efficiency.3. Less production procedure, decrease production energy consumption, and reducecost.4. Owing to adopting low temperature, normal pressure polymerization, intrinsicactivity of crystal aluminium chloride are maintained, which make it bear thefeatures of adaption to wide water area, less dosage (less more or less 20% thanordinary reagent), yielding less sludge, lower cost of water treatment, largerflocs, quick sedimentation, better adaption to the abrupt change of raw water turbidityand flow.Storage: Kept in dry place against moisture and avoiding heat. Avoiding poisonoussubstance contaminated and to be exposed to heat and moisture at storage andtransportation. Package must not be damaged.Package: Packed by plastic bag with woven bag outside, net weight 25Kg per bag.

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
Poly-Aluminium Chloride (PAC)
 Poly-Aluminium Chloride (PAC) ( Poly-Aluminium Chloride (PAC))
Product Name: Poly-Aluminium Chloride (PAC)Place of Origin: ChinaThis product undergoes pressurized spray drying by using an pressure type atomizer. The outputted product after this process is a porou
Poly-Aluminium Chloride (PAC) (Spray Dried Process)
 Poly-Aluminium Chloride (PAC) (Spray Dried Process) ( Poly-Aluminium Chloride (PAC) (Spray Dried Process))
This product undergoes pressurized spray drying by using an pressure type atomizer. The outputted product after this process is a porous fine particle or hollow fine particle. This item features dust
Poly-Aluminium Ferrous Chloride (PAFC)
 Poly-Aluminium Ferrous Chloride (PAFC) ( Poly-Aluminium Ferrous Chloride (PAFC))
This product has been developed through in-depth research of the hydrolyzing and coagulating mechanisms of poly-aluminum, aluminum and iron salt. Using the advantageous properties of aluminum salt and
Poly-Aluminium Ferrous Chloride (PAFC)
 Poly-Aluminium Ferrous Chloride (PAFC) ( Poly-Aluminium Ferrous Chloride (PAFC))
This product has been developed through in-depth research of the hydrolyzing and coagulating mechanisms of poly-aluminum, aluminum and iron salt. Using the advantageous properties of aluminum salt and
Polyacrylamide (PAM)
 Polyacrylamide (PAM) ( Polyacrylamide (PAM))
Features:Polyacrylamide (PAM) is a unidimensional with polymer, easily dissolved in water, and its water solution is almost transparent thick fluid with noncorrosivity and innocuity, and not belong to
Polyaluminium Chloride (PAC) ( Spray Dried Process )
 Polyaluminium Chloride (PAC) ( Spray Dried Process ) ( Polyaluminium Chloride (PAC) ( Spray Dried Process ))
The features of pressure type spray dried method is determined by the operating principle of pressure type atomizer. The output product afterpressure type spray dried process is porous fine particle o
Polyaluminium Chloride (PAC) (Roller Dried Process)
 Polyaluminium Chloride (PAC) (Roller Dried Process) ( Polyaluminium Chloride (PAC) (Roller Dried Process))
Product Name: Polyaluminium Chloride (PAC) (Roller Dried Process)Place of Origin: ChinaAL2O3: ≥29Basicity: 40-90%Water insoluble substance: ≤1.5%pH value (1% aqueous solution): 3.5-5.0Comp
Polyaluminium Chloride (PAC) (Roller Dried Process)
 Polyaluminium Chloride (PAC) (Roller Dried Process) ( Polyaluminium Chloride (PAC) (Roller Dried Process))
AL2O3: ≥29Basicity: 40-90%Water insoluble substance: ≤1.5%pH value (1% aqueous solution): 3.5-5.0Compared with other coagulants, this product shows the flowing features comparedwith other
Polyaluminium Chloride (PAC) (white)
 Polyaluminium Chloride (PAC) (white) ( Polyaluminium Chloride (PAC) (white))
Product Name: Polyaluminium Chloride (PAC) (white)Place of Origin: ChinaThe features of pressure type spray drying method are determined by the operatingprinciple of pressure type atomizer. The output

Likewise in category "Chemical Reagents":
 Sodium Hypochlorite
Sodium Hy...
 Sodium Iodide
Sodium Io...
 Manganese Sulphate
Manganese...
 Sodium Iodide
Sodium Io...
 Magnesium Acetate
Magnesium...
 Flame Retardant Decabromo Diphenyl Ethane (TDE)
Flame Ret...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com