Address: Yugu Road 147, hangzhou, Zhejiang, China (Mainland)
Phone: +86-571-87510719
Bronze Bushing
Fb092 bronze bushing is based on bronze cusn8.3p0.3 and evenly distributed drilling oil hole on itsbody. When in assembly, oil or grease should be stored in the holes before bushing is sealed from both ends. Fb092 has the advantages of abundant oil storage, easy-to-assembly, machine compactness etc. It can replace the conventional whole copper sleeves thus to save much cost. It is mostly applied under middle load, low speed such as in convey machine, hoisting machine, windlass, aligning machine etc.
Fb090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be in corporated with spherical of diamond shaped indentati
Jf-800 bimetal bushing is based on steel and sintered with cupb10sn10 as a lining layer. This type has the best performance within the range of cu-pb alloy constructured bushing. Thereforce it has a w
JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing.Thereforce it has a wi
1. Good load capacity and anti-wear.2. It is used in high load capacities and low speed with rotational, oscillating or frequent stop-start motion.3. It can work long time without oil in the condition
1.Dry or only a trace of grease or oil required maintenance free.2.Low friction and with long life.3.Low vibration,low noise and non-pollution in operation.4.Electroplating is possible to prevent corr
We are a manufacturer which produces many kinds of self lubricating bearings, the mainly product: Sf-1(du) self lubricating bearing, sf-2(dx) boundary lubricating bearings, jf-800 bimetals coiled bear
As an enterprise specialized in the development and production of self-lubricated bearings, jiashan tengfei oilless bearing factory produces top grade self-lubricated bearings that are well recognized
Can be used low, middle and high load. When under high load, wear peformance degrades accordingly.It`s a general-purpose product and be applied under low or high pressure, low or high temperature, and
Can be used low, middle and high load. When under high load, wear peformance degrades accordingly.It`s a general-purpose product and be applied under low or high pressure, low or high temperature, and
help
Add to favorite
Favorite products
