Russian

German

French |

help

Add to favorite

Favorite products

Description

Vehicles, Spare Parts & Accessories / Parts and Accessories for Vehicles / Parts and Accessories for Automobile Vehicles / Automobile Vehicle Brake System and Parts /

Steering Screw and Nut Assembly (Рулевого винта и гайки Ассамблеи)

Zoom in

Producer information

Company:
Ningbo CIE Corporation

Address:
Foreign Trade Building,Sishan Road,Hushan, Cixi, Zhejiang, China (Mainland) Zip: 315300

Phone:
+86-574-63886595

Steering Screw and Nut Assembly

Product Name: Steering Screw and Nut AssemblyModel Number: CIE-JK04Place of Origin: ChinaThe ball screw assembly consists of a screw and a nut, each with matching helicalgrooves, and balls which roll between these grooves between the nut and the screwwhen the nut or screw is rotating. The balls are deflected by the deflector intothe ball return system of the nut and they travel through the return systemto the opposite end of the ball nut in a continuous path, and exit from the ballreturn system into the ball screw and nut thread raceways continuously to recirculatein a closed circuit.The ball nut assembly: ball nut determines the load and life of the ball screw assembly.The ratio of the number of threads in the ball nut circuit to the numberof threads on the ball screw determines how much sooner the ball nut will reachfatigue failure (wear out) than the ball screw will. Ball nuts are manufacturedwith two types of return systems.

Add to Basket

Web address

Other goods of this manufacturer :

Tapered Roller Bearing
	Tapered roller bearings are designed so the tapered vertex of the raceway surfaces of the inner and outer rings and rollers converge at one point on the centerline of the bearing.Due to this design fe

Tapered Roller Bearing Of Auto Bearings
	The roller in this bearing is tapered similar to a cone with the point cut off. This bearing must be well aligned due to the rigid length of the roller. Excessive misalignment will cause edge loading

Tapered Roller Bearings
	Separable, they consist of inner ring and a cage with rollers. They are designed to carry large and compound loads (axial and radial) in one direction only.313 series (with enlarged contact angle) are

Tapered Roller Bearings
	Product Name: Tapered Roller BearingsModel Number: CIE-JMS03Place of Origin: ChinaSeparable, they consist of inner ring and a cage with rollers. They are designed to carry large and compound loads (ax

Tapered Roller Bearings-Double Row Roller Bearing
	Single row tapered roller bearing in inch0 Series: 02473/20; 02474/20; 02475/20; 02872/20; 02878/20; 05079/185; 07079/204; 07093/204; 07093/196; 07097/196; 07097/204; 07098/204; 07098/205; 08125/231;

Wheel Hub Bearing
	Our Auto bearing series including as follows:Alternator bearingNeedle Roller bearingAir compressor and Magnetic clutch bearing.Clutch release bearing,Constant velocity joint-C.V.joint.,Front and beari

Wheel Hub Bearing
	1) Double-row angular contact ball bearing with integral inner and outer mountingflange. Easier mounting because of preset preload2) Double-row angular contact ball bearing with integral inner and out

Wheel Hub Bearing
	1) Double-row angular contact ball bearing with integral inner and outer mountingflange. Easier mounting because of preset preload2) Double-row angular contact ball bearing with integral inner and out

Worm and Sector Type Steering Gear
	Ball or roller bearings are used to support both end of the worm gear and areadjustable to remove end or side play from the worm gear, the cross shaft isupported by bushing, needle bearings or a combi