Address: 9F-1,27,Sec.2,Huan Nan Rd.,Ping-Jenn City,Taoyuan Hsien,Taiwan,R.O.C.
Phone: +886-3-4952007
CCTV ACCESSORY, SCANNER CONTROL
SCANNER CONTROL MODEL NO.: T1-14A2 (AC24V), T1-14A3 (AC110V), T1-14A4 (AC230V) CONTROL OPTIONS: 1. AUTOMATIC L / R ALTERNATION CONTROL: SET SWITCH TO AUTO POSITION THE ALTERNATED BASE STOP RUNNING RIGHTWARD WHEN REACH THE RIGHT END MARGIN, AND THEN START LEFTWARD AND STOP AGAIN THE UNTIL REACH LEFT END MARGIN. AGAIN, THE BASE GO RIGHTWARD AND REPEATED. (NOTE: THE ANGLE RANGE OF ALTERNATION IS DECIDED BY END MARGIN SETTING) 2. MANUAL L/R ALTERNATION CONTROL: SET SWITCH TO MANUAL POSITION, PRESS LEFT OR RIGHT BUTTON, THE ALTERNATING BASE WILL MOVE LEFT OF RIGHT. RELEASE THE BUTTON TO STOP. CONNECTION: 1. AC POWER CABLE, 2. COMMON GROUND, 3. LEFT, 4. RIGHT INPUT VOLTAGE: 110VAC / 230VAC OUTPUT VOLTAGE: 24V / 110V / 230VAC CONTROL FUNCTION: AUTO / MANUAL L / R DIMENTIONS: 150 mm (W) x 200 mm (D) x 40 (H) mm
SCANNER CONTROL MODEL NO.: T1-14A2 (AC24V), T1-14A3 (AC110V), T1-14A4 (AC230V) CONTROL OPTIONS: 1. AUTOMATIC L / R ALTERNATION CONTROL: SET SWITCH TO AUTO POSITION THE ALTERNATED BASE STOP RUNNING RI
VCR CONTROL MODEL NO.: T5-14A3 (AC110V), T5-14A4 (AC230V) THE VIDEO RECORDER CONTROLLER IS TO START THE VIDEO RECORDING FUNCTION WHEN THE ALARM IS STARTED. THE FUNCTIONS ARE AS BELOW: FRONT DISPLAY B
VCR CONTROL MODEL NO.: T5-14A3 (AC110V), T5-14A4 (AC230V) THE VIDEO RECORDER CONTROLLER IS TO START THE VIDEO RECORDING FUNCTION WHEN THE ALARM IS STARTED. THE FUNCTIONS ARE AS BELOW: FRONT DISPLAY B
VIDEO TIMER MODEL NO.: T8-14A3 (AC110V), T8-14A4 (AC230V) THIS TIMER DEVICE HAS THREE PUSH BUTTONS (UPPER, LOWER AND RIGHT SIDE BUTTON). WHEN MAKING AN AMENDMENT OR ATTEMP TO DISPLAY THE TIME, PUSH T
VIDEO TIMER MODEL NO.: T8-14A3 (AC110V), T8-14A4 (AC230V) THIS TIMER DEVICE HAS THREE PUSH BUTTONS (UPPER, LOWER AND RIGHT SIDE BUTTON). WHEN MAKING AN AMENDMENT OR ATTEMP TO DISPLAY THE TIME, PUSH T
Likewise in category "Safety Systems Accessories":
help
Add to favorite
Favorite products
