Drill Press Vise - Central Sliding Bar Type

1.The axial sleeve and movable jaw are casted in one single piece. 2.Parallelism between the central bar and lead screw is 0.05mm. 3.Allowance between the axial sleeve and central bar is 0.05mm. 4.The central sliding bar is held by the axial sleeve with ring-shaped connection in opther words, in a 360-degree surface contact manner. 5.The possibility of deformation would be zero, because of the impact pressure is applied to the whole circular surface around the central slide bar.

Add to Basket

Web address

Other goods of this manufacturer :

Pipe Threader
	1.Lighe weight, light threading work. 2.Ratchet handle set convenient for forward threading and reversing movement. 3.Each part is more firmly assembled than other similar products. 4.Easily change d

Standard Vise
	1.Accurate machining & assembling. 2.Precision machine for use on vertical & horizontal position.

Steel Jaw Vise
	1.With one horizontal v-groove and three vertical v-grooves on the jaw palte of the body, it can clamp the steel bar firmly. 2.Vertical v-groove on movable jaw facing. 3.GS-101 has precision ground b