The EDFA5000B-S uses 980 or 1480nm laser diodes as pumping source. The maximum output in single-stage is 19dBm, 26dBm in dual-stage. For maximum pumping performance and extended life time, the laser has been designed to resist to a reflection of up to -14dB, and the laser driving current will be reduced when the input power is lower than the defined threshold. Features: 1.Low noise figure 2.Wide wavelength range 3.User-friendly interface 4.Good heat spreading 5.Modular design for flexible scalability 6.Plug & play 7.Hot swap 8.Redundant power supply 9.Smooth gain flatness 10.Auto-wavelength-tracking filter Specifications: 1.Wavelength Range:1530~1565nm 2.Input Power:-5 ~ +2(Booster)dBm -20 ~ -9(In-line)dBm -43 ~ -21(Pre-amplifier)dBm 3.Output Power:12 ~ 26(Booster)dBm 10 ~ 20(In-line)dBm 4.Small Signal Gain:30~40(In-line)dB 25~35@Pin=-43dBm (Pre-amplifier)dB 5.Noise Figure:4.5 (typ) @Pout =12~20dBm, 5.0 (typ)@Pout =21~26dBm (Booster)dB 5.0 (typ)(In-line)dB 4.2 (typ)Pre-amplifier)dB 6.Stability: 0.3(max.)dB 7.PDG:0.3(max.)dB 8.PMD:0.3(max.)ps 9.Return Loss:50(min.)dB 10.Operating Temperature:0~50 XC 11.Storage Temperature:-20~70 XC 12.Humidity:10~90 (non-condensing)% 13.Dimensions:483(W) x 350(D) x 267(H)mm 14.Weight:22(max.)kg 15.Interface:1 set of RS-232/422/485 serial port; 1 set of 10/100 Base-T Ethernet
The EDFA5000B-S uses 980 or 1480nm laser diodes as pumping source. The maximum output in single-stage is 19dBm, 26dBm in dual-stage. For maximum pumping performance and extended life time, the laser
TTC`s Multi-Port EDFA for CATV is a compact, powerful, and stable optical device that increases a network`s line budget over a wide wavelength range. The state-of-the-art technology enables low-cost
TTC`s Multi-Port EDFA for CATV is a compact, powerful, and stable optical device that increases a network`s line budget over a wide wavelength range. The state-of-the-art technology enables low-cost
The OAS2800-S is the standalone optical auto switch. The case size has been designed for EIA- 310 standards. It fits 19- or 23- inch cabinet racks, and occupies only 1-U height (44.45mm). Also, the
The OAS2800-M needs to work with the main frame. The main frame has 2 sets of independent power circuits. Also, it has 4 fans for heat spreading. The main frame adopts guided slot design, and it can
The OAS2800-S is the standalone optical auto switch. The case size has been designed for EIA- 310 standards. It fits 19- or 23- inch cabinet racks, and occupies only 1-U height (44.45mm). Also, the
The OAS2800-M needs to work with the main frame. The main frame has 2 sets of independent power circuits. Also, it has 4 fans for heat spreading. The main frame adopts guided slot design, and it can
TTC`s Outdoor EDFA for CATV networks is a complete optical amplifier design for outdoor application. The design principle is using it as a strand mount single in/ single out line amplifier. The basic
TTC`s Outdoor EDFA for CATV networks is a complete optical amplifier design for outdoor application. The design principle is using it as a strand mount single in/ single out line amplifier. The basic