HomePNA to Ethernet Converter

Complies with Ethernet IEEE802.3 standard Complies with 1Mbps HomePNA specification 1.1 2*1Mbps RJ-11 connectors,one for HomePNA and one for telephone connection. 2*10/100 Mbps RJ-45 Ethernet port Compact size Design for easy install Store-and-forward architecture filters fragment &CRC error packets. Support 256kByte system memory per module. Support 4K MAC address table per module Support the distance up to 4000 feet on each RJ-11 phone line port(CN-112EN ONLY) Support rich diagnostic LED indicators Transparent to all kind of network protocol External Power adapter FCC/CE Certification

Add to Basket

Web address

Other goods of this manufacturer :

HomePNA USB Adapter
	11Mbps HomePNA RJ-11 connector. 1bypass RJ-11 connector for voice service. 110/100Mbps Ethernet RJ-45 port. 1A-type USB port for a standard USB(v1.1) cable No external power required. Dual-speed

HPNA Enhanced Switch
	2 10/100BASE-TX Fast Ethernet port and 16 independent Home networking ports Wire speed layer 2 switching 4M bits packet switching 2M bits control data, including the Switching address and VLAN table

HPNA Switch
	2 10/100BASE-TX Fast Ethernet port and 16 independent Home networking ports Wire speed layer 2 switching 4M bits packet switching 2M bits control data, including the Switching address and VLAN table

IEEE 802.11g Wireless ADSL2/2+ Router
	1. Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.4, G.992.5 and ANSI T1.413 Issue 2 standards. 2. Fully compliant with Annex A/B/B(U-R2) ADSL specifications. 3. All Digital Loop ADSL supporte

IEEE 802.11g Wireless ADSL2/2+ Router
	1. Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.4, G.992.5 and ANSI T1.413 Issue 2 standards. 2. Fully compliant with Annex A/B/B(U-R2) ADSL specifications. 3. All Digital Loop ADSL supporte

VDSL CPE
	VDSL port supports 20Mbps symmetry data bandwidth on Full-Duplex mode and distance up to 4000ft Voice and Data work on the same telephone line Mini size design Supports rich diagnostic LED indicators

VDSL Switch
	The whole management stack can stack up to 8 sets 16 * VDSL ports within one RJ-21 connector 2 * 1000Mbps copper/fiber slide-in slots for optional module Proprietary management bus extend up to 800 m

1 Port Ethernet ADSL2/2+ Router
	1. Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413 Issue 2 standards. 2. Fully compliant with Annex A/B/B(U-R2) ADSL specifications. 3. All Digital Loop ADSL supported. 4. Dow

4 band VDSL Switch
	Supports symmetric line rates of 40Mbps at 1,600 ft, and asymmetric line rates of 70Mbps downstream and 50Mbps upstream at 1,300 ft Directly controls VDSL link rates of VDSL bridges over the standard