High Speed Link Master Controller Interface Cards

*One/Two Independent Network Operation ,*One master with 2 network segment ports ,*Max. 200m x 2 communication distance under 6Mbps ,*Selectable baud rate with up to 12Mbps transfer rate ,*Full and half duplex transfer mode are jumper selectable ,*On board memory ,*Programmable timer interrupt ,*RJ45 phone jack for easy installation ,*LED diagnostic

Add to Basket

Web address

Other goods of this manufacturer :

PC/104-plus 12-bit Multi-function DAS Module
	32-bit PC/104-plus bus with Bus-mastering DMA ,12-bit, 110KS/s A/D conversion ,16-CH single-ended or 8-CH differential inputs ,4 level programmable gain ,*2-CH 12-bit D/A output

Socket 370 Celeron/Pentium III/C3 Network Engine with Triple LAN/MiniPCI
	Supports Socket370 based Intel Celeron/Pentium III (FC-PGA/FC-PGA2) and VIA C3 processors up to 133,MHz FSB ,VIA Pro133T Chipset ,System memory up to 512MB PC-133 ECC/Non-ECC SDRAM ,Triple high p

Socket 370 SBC, 1.3GHz P-III, with MiniPCI/VGA/Dual Ethernet
	Intel Pentium-3 CPU up to 1.3G ,Two PC-133 DIMM ,MiniPCI interface ,ESD Protection on every I/O ,High drive ISA bus ,ISA high-drive capability 64mA ,*Modem ring-in from COM1 (with ATX power sup

Socket 478 Pentium-4 SBC with DDR/VGA/Dual Ethernet
	Intel Pentium-4 CPU ,Two DDR DIMM ,Dual Ethernet ,ESD Protection on every I/O ,High drive ISA bus ,ISA high-drive capability 64mA ,*Support flash module DOM (8MB~256MB) or 2.5`` IDE flash disk

USB Multi-function DAS Module
	Multi-function data acquisition modules attach to computer via Universal Serial Bus (USB) ,USB Specification 1.1 Compliant ,8 differential analog input channels with 12-bit resolution ,Simultaneo

20MHz Simultaneous 4-CH Analog Input Cards
	32-bit PCI Bus, Plug and Play ,Up to 20 MHz sampling rate per channel ,4 single-ended simultaneous input channels ,12-bit (9812) or 10-bit (9810) analog input resolution ,*4 A/D converters, one c

3U CompactPCI Low Power Pentium-III/Celeron CPU Module
	PICMG 2.0 CompactPCI Specification R3.0 Compliant ,PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant ,Standard 3U form factor ,Design for Intel Lower Power BGA2 Pentium-III or Celeron ,*

4 Axis Stepper & Servo Motion Controller Card
	32-bit PCI bus, plug & play ,Pulse output rate up to 2.4MHz ,Pulse output options: OUT/DIR, CW/CCW ,2 axes linear interpolation ,Programmable acceleration and deceleration time ,Trapezoidal and

6U 64bit/66MHz CompactPCI Dual Tualatin CPU Module with DDR, Triple LANs and VGA
	PICMG 2.0 CompactPCI Specification R3.0 Compliant ,PICMG 2.1 CompactPCI Hot-Swap Specification R2.0 Compliant ,Standard 6U form factor with 2-slot (8TE/HP) space ,Design for Dual Intel Socket-370