Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Optical & Optical Equipment & Accessories /  Optical Materials & Accessories /  Optical Materials & Components / 
Send Request

about this service

Producer information
Company:
TOP-UP INDUSTRY CORP.
 
Address:
 
Phone:
+886-3-3380787 +886-3-3389486

Attenuator


Electronic performance: ()Impedance (output/input) : 75 ohm ()Max. operation: AC 50V ()Power rating: 0.02 W ()SWR:

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
Dimmer Switch
Dimmer Switch (Dimmer Switch)
Electrical and mechanical specificaitons: ()Push type: ()Contact rating: 10A/250V AC Initial contact resistance: 20 milli ohm max. ()Proof voltage: 3KV min Insulation resistance: 50,000M ohm. ()Life:
9 mm Metal Shaft Potentiometers
9 mm Metal Shaft Potentiometers (9 mm Metal Shaft Potentiometers)
Key specifications/ special features: ()Gang error is within 3dB at -40 to 0 dB ()Small- only 9.5 mm wide. ()Three mounting heights from the PC board to shaft center: 6.5 mm, 10 mm and 12.5 mm ()Inse
LCD TYPE
LCD TYPE (LCD TYPE)
LCD TYPE
PUSH SWITCH
PUSH SWITCH (PUSH SWITCH)
PUSH SWITCH
Remote Control
Remote Control (Remote Control)
Contents: 6,8,13,20,23,26,28,29,30,31,32,34,36,37,39,41,43,44,46,47,51,55 key remote control unit. ()Circuit: refer to individual model ()Resonator: 393 ~ 650 KHz, 1/2/3.48/4/8/12 MHz ()LED: one or t
RF REMOTE CONTROL SWITCH FOR LITE
RF REMOTE CONTROL SWITCH FOR LITE (RF REMOTE CONTROL SWITCH FOR LITE)
RF REMOTE CONTROL SWITCH FOR LITE
SMT Jack
SMT Jack (SMT Jack)
Key specification / special features: ()DC jack of 2.0/2.5/3.5 dia ()High temp Polymer ()DC jack of 1.0/1.3 dia ()Reflow process is available ()Taping reel available. () () ()
11 mm/14mm Snap-In Insulated Shaft Potentiometers
11 mm/14mm Snap-In Insulated Shaft Potentiometers (11 mm/14mm Snap-In Insulated Shaft Potentiometers)
A variety of types are available and can be used for a wide range of products including audio equip. ()Flux resistance is improved through outside molding around the resistor. ()Units can be provided

Likewise in category "Optical Materials & Components":
Lenses
Lenses
Wafer with Image and Logo Pattern
Wafer with...
Dense Wavelength Division Multiplexer (DWDM)
Dense Wave...
Line light guide
Line light...
Multi-spot dome light guide
Multi-spot...
Dual and multi-arm light guide
Dual and m...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com