|
|
CAPACITOR
1. Operating Temperature : -25 C ~ +85 C 2. Capacitance Range : 1.0 ~ 120.0 F 3. Capacitance Tolerance : J = ?5%, U= +10 ~ - 5 % , K = ?10%. 4. Rated Working Voltage Range : 250 ~ 500 Vac 50/60 Hz 5. Withstand Voltage Test : ( A ) Dielectric strength test ( TV ): Rated Voltage x 175 % for 1-5 Sec ( B ) Between Terminals and Case( TC ): Rated Voltage x 2 + 1000V for one minute, at 25 C 6. Dissipation Factor ( DF ): 0.5 % MAX. When measured at 1 KHZ, 25 C 7. Insulation Resistance ( IR ): ( A ) Between Terminals: Above 1000 F,at in 100VDC in 25 C ( B ) Between Terminals and Case: Above 10000m, at 500vdc in 25 C 8. Pull Test : Will sustain 2 Kg steady pull in the direction of lead egress and 1 Kg steady pull atany 90 degree angle for 60 seconds. After test, capacitor shall show no evidence of damage and pass all electrical requirements 9. Damp-heat Test : capacitor are subjected to an environmental test chamber at R.H. 90 to 95 %,operating temperatures for 240 hours. After the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteria: ( A ) Capacitance change shall be less than 3% ( B ) Dissipation factor shall be less than 0.2 %. ( C ) Insulation resistance shall be over 50 % of the minimum requirement. 10. Life Test : ( on-off ) 100,000 cycle ?5000 times on 2 seconds off 2 seconds at operating temperatures with rated voltage. After the test,the capacitance drift 5 %, dissipation factor 0.5 %, insulation resistance 50%.
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
