Aluminum 6061-T4 Drawn Seamless TubeO.D max. : 70mm / 2.76" Mechanical PropertiesUltimate Tensile Strength30 psi Elongation% in 2Machinibility and WeldabilityMachinability is good, 75%. Weldability is good, can be done by all methods.6061-T4 Drawn Seamless Round Tube Technical SpecificationsWW T 700/6F 6061-T4 Drawn Seamless Round Tube ChemistryCu0.15-0.40Si0.40-0.80Fe0.70 maxMn0.15 maxMg0.80-1.20Zn0.25 maxCr0.04-0.35Ti0.15 max 6061 is commonly used for structural components, screw machine parts, frames, brackets, jigs, fixtures, base plates, machine parts, couplings, hydraulic valve bodies, valves and valves parts, fuse parts, gears and shafts, worm gears, pistons, rectifier parts, fasteners, hardware, truck and marine components, marine fittings and hardware, electrical fittings and connectors, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, camera lens mounts, bike frames, etc. 6061 is used for heavy duty structures requiring good strength-to-weight ratio with good corrosion resistance. 6061 is easily cold worked and formed in the annealed condition. Cutting, stamping, bending, spinning, deep drawing, drilling, tapping, etc. are all readily accomplished using standard methods.
Aluminum 7075 Drawn Seamless TubeO.D max : 70mm / 2.76" 7075 Aluminum7075 is the other "aircraft grade" aluminum. Its principal alloying ingredients are zinc and copper, this
Shanghai Tri-Trust Industrial Co.,Ltd provides CATV connectors and adapters, F type, IEC type, 5/8″ UNEF type, male and female, Pin Type Connector,Splice connectors,etc.