Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Electronic Components & Parts /  Electro-Adjusting Components & Materials /  Electronic Components Accessories / 
Send Request

about this service

Producer information
Company:
Jinmuyu Electronics Co., Ltd
 
Address:
Room 132, Building 16, Tian Qiao Wan, XinHua North Road, TongZhou District
 
Phone:
+86-010-69559637

jmy504 hf rfid reader and writer modules with pcd nxp rc522 rc523


JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: • PCD: NXP RC522, RC523• Working frequency: 13.56MHz• RF standard: ISO14443A, ISO14443B • Operating distance: 80mm(depending on card and antenna design)• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only• Auto detecting card: Supported, default OFF• EEPROM: 512 Bytes• Interface: IIC & UART (selected by SPS pin, recommend to use IIC)• Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps• Max.command length: 254 Bytes• Interface level: 3.3V(TTL level; 5V tolerance)• Power supply: DC 5.0V• Power consumption: 50mA• Dimension: 42mm×21mm×8mm• Package: DIP32• Weight: about 15g• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)• ISP: Supported• RoHS: Complianthttp://www.jinmuyu.com/hf-rfid-modules/jmy504.html

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
jmy505 50ohm coaxial cable rfid reader and writer modules
jmy505 50ohm coaxial cable rfid reader and writer modules (jmy505 50ohm coaxial cable rfid reader and writer modules)
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. Th
jmy506 iic i2c uart interface hf rfid reader and writer modules
jmy506 iic i2c uart interface hf rfid reader and writer modules (jmy506 iic i2c uart interface hf rfid reader and writer modules)
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. Th
jmy601 uart TTL Level interface rfid reader and writer modules
jmy601 uart TTL Level interface rfid reader and writer modules (jmy601 uart TTL Level interface rfid reader and writer modules)
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF pro
JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module
JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module (JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module)
 JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it sup
MCU ARM7 HF RFID Reader/Writer Module JMY610
MCU ARM7 HF RFID Reader/Writer Module JMY610 (MCU ARM7 HF RFID Reader/Writer Module JMY610)
JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. Th
NXP RC522 RC523 HF RFID ID card Reader Module JMY609
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 (NXP RC522 RC523 HF RFID ID card Reader Module JMY609)
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader m
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 (RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620)
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned b
RS232C interface HF RFID Reader and writer Module JMY603
RS232C interface HF RFID Reader and writer Module JMY603 (RS232C interface HF RFID Reader and writer Module JMY603)
JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The des
RS232C interface HF RFID Reader/Writer Module JMY612
RS232C interface HF RFID Reader/Writer Module JMY612 (RS232C interface HF RFID Reader/Writer Module JMY612)
JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The desi

Likewise in category "Electronic Components Accessories":
Metal Badges/Emblem Pins/Soft PVC/Membrane Keypad/Plastic Name Plates/
Metal Badg...
Plastic parts
Plastic pa...
Injection Molded Parts And Products
Injection ...
F.R.P cable tray & ladder and accessories
F.R.P cabl...
INSULATED SOCKET CONNECTOR
INSULATED ...
Insulated Socket Connectors
Insulated ...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com