Two-component road marking equipment is a new and superior road marking type. Marking types: Swing structure type, screeding flat-line type and high-pressure airless spraying type. Machine types by automation degree: marking truck, driving type, self-propelled type and hand-push type. DY-SSTC Self-propelled type tow-component road marking machine is mainly used for small scale road marking and pedestrian line marking.1. The stainless steel charging bucket whose discharging hole can be opened and closed freely. The upper part is equipped with automatic stirrer filled with paint and hardener while the lower part equipped with acentric shaft with special treatments.2. Paint tank is made of stainless steel (type I) and cold-rolled anti-oxidation materials (type II).3. Glass beads bin with windows is observable, helpful to check the quantity in the bin timely.4. Automatic quantitative glass beads dispenser is synchronous with the swing system to ensure the dispensing evener, exact and more economical.5. The convenient foot-controlled parking device can stop the machine safely during transportation and construction. At the same time, it is able to empty the remaining glass beads completely to prevent them from being formed lumps because of moisture.6. Front wheel direction finder (type I ) can lock the wheel with the brake handle controlled device to ensure moving in straight line or freely turning. Rear wheel direction finder ((type II) is able to lock the rear wheel oriented device, make sure the machine walking along the oriented straight line or turns freely.7. A firm welded chassis frame; its surface is galvanized or painted with corrosion-resistant hard film; high-speed imported bearing makes the machine lighter and more flexible.8. The extractable guide rod can change directions freely to up, down, left or right.9. Warning lights can adjust its flicker frequency freely, improving the safety of road marking construction.
Thermoplastic Road Marking Machine
Road traffic markings delimit or installed in a variety of lines on the road, arrows, text, graphics and facade mark entity mark, composed of protrusions such as ro
Cold Paint Road Marking Machine
The cold paint road marking is very common with a long history. Different from thermoplastic road marking, it is completed only by one unit road marking machine. In ac
Double-cylinder Pre-heater
Road marking paint is usually divided into the solvent-based and hot melt two categories, solvent type used water-based, organic solvent-based. Water based road marking pai
Single-cylinder Pre-heater
Hot melt spray road marking paint is melted to 190-200 degrees Celsius in the road marking preheater, its construction in the road marking coating to form a uniform thickne
Two-component Road Marking Machine
The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold plastic road marking
Cold paint road marking is very common with a long history. Marking types: High-pressure airless type and low-pressure air spray type. Cold paint types: Cold solvent, cold water based cold solvent and