Global Tech’s DNT series EoP Interface Converter adopts inverse multiplexing technologies, and supports 32M maximum Ethernet bandwidth. DNT Interface Convert can combine multi Ethernet channels for 10M/100M Ethernet service transmission and supports 1 or maximum 16* E1 channels combination.The Multi-E1 Bridge can cooperate with Ethernet Switch or Hub directly and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range. The Interface Converter can deploy in LAN inter connection, Centre Office and CPE inter connection, Video On Demand, Remote Surveillance, and E1 tributary card connection in Switches.In this Series we are avaible in 1/4/8/16 E1 to Ethernet(Optional for 4ETH). Products Feature● Available E1 channel quantity auto detection and bandwidth allocation. The E1 sequence number and quantity can cooperate flexibly and asymmetrically at both ends.● Realize 4 Ethernet channels over 1 up to 16 E1 channels inverse multiplexing, support TAG VLAN setting and JUMBO frame transparent transmission from IEEE 802.1Q, and cooperate with Ethernet switch with VLAN function. ● Support E1 channel delay differentiation detection function and 220ms maximum E1 channel delay differentiation.● Automatically disable the E1 channels with LOS, AIS, LOF alarm, and intelligently enable them once the alarms resolved.● RS232 Serial and SNMP based Network Management System, to monitor and configure the Network Element operation status.Tehcnical Parameterl Optical Interface● Bit Rate: 1.25Gb/s● Related Standard: ITU-T G.957, G.958● Single Fiber/ Dual Fiber, FC/SC, Transmission Distance, SMF/MMF optional● Optical Wavelength: 850nm, 1310nm, 1550nm● Mean Tx Power: ≥ -8dBm, SMF, 1310nm ≥ -25dBm, MMF, 850nm● Rx Sensitivity: ≤ -36dBm● Rx Range: ≥ 25dB l Ethernet Interface● Connector: RJ45● 10M/ 100M auto negotiation● Full/half duplex auto negotiation● Frame Length: 64, Up to 1916 Bytes l E1 Interface● Bit Rate：2.048M bps ±50ppm● Related Standard: ITU-T G.703, G.704● Impedance: 75Ω, 120Ω● Signaling: Channel Associated Signaling ● Framing Mode: Framed/Unframed, Configurable Timeslot Operation Environment■ Working Temperature: -20℃~ 70℃■ Storage Temperature: -40℃~ 85℃■ Relative Humidity: 5%~ 95%, non-condensing■ No corrosive and solvent gas, no dust and heavy EMI■ Power Supply: AC 180~ 260VDC -72~ -36V■ Typical Consumption: ≤ 20W■ Physical Dimension: 448mm(W)*44mm(H)*314mm(D)For more detail please visit our website http://www.cantongt.com/en
with compact design, flexible topology and intelligent architecture. GT-SDH-155B provides two STM-1 optical line interfaces, versatile E1, V.35 and FE multiplexing and transmission, ITU-T G.813 compli
lobal Tech EoP, Ethernet over PDH, Aggregation Interface Converter is mainly deployed for Ethernet data transparent transmission over 1 up to 16, or 1 up to 63, E1 channels, and can support maximum 15
lobal Tech EoP, Ethernet over PDH, Aggregation Interface Converter is mainly deployed for Ethernet data transparent transmission over 1 up to 16, or 1 up to 63, E1 channels, and can support maximum 15
Global Tech GT-SDH-155A 63E1 SDH is the compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520M
Global Tech Optical Bypass Protection System is a intelligent system which applied in fiber optical communication and able to bypass failed node. It can automatically indentified the status of power a
Global Tech’s Optical Fiber Fast Connector can work as optical fiber closure through cold splicing technology. As a substitute to the conventional pigtail patch cord, Global Tech adopts V-Groove
Global Tech’s Optical Fiber Mechanical Splicer can align two bare optical fibers through cold splicing technology. As a substitute to the conventional fuse splicing technology, Global Tech adopt
Global Tech are also providing low cost high quality fiber path cord to customer for turnkey project. These kinds of products are come from our veritified partner which we done strict testing test(Opt
Global Tech Optical Line Auto Protection Switching System consists of Optical Line Protection and the operation terminal, and can realize optical power monitoring, optical line auto switching, network
Likewise in category "Additional Equipment for Wire Networks":
help
Add to favorite
Favorite products
