Address: No.718 South Shengxin Road, Shanghai, China (Mainland) Zip: 201802
Phone: +86-21-69172008 +69172009*809 +3917
LQRY Type Waterless Cooled Hot Oil Pump
Features:1) This pump is supported by ball bearings at the both ends, the front end lubricated by oil, the rear end lubricated by grease, and an oil pipe in the middle2) Self heat dissipation structure3) Combination of packing seal and mechanical seal, the former made of high temperature resisting material for outstanding thermal adaptability, the latter made of hard alloy material of high mechanical strength and outstanding abrasion resistance, thus to ensure good sealing performance under high temperature conditions4) Lip seal of the third generation of PTFE for much better sealing performance, which is 25 times upgraded compared with rubber seal, as well as outstanding corrosion resistanceApplication:It is widely used in heat carrier heating system in the industries of petroleum, chemical, rubber, plastic, pharmaceuticals, textile, printing and dyeing.It is an optimal hot oil circulation pump to deliver light corrosive high-temperature liquid not containing solid particles. Service temperature: less than 370°C.
Features:1) This pump is supported by ball bearings at the both ends, the front end lubricated by oil, the rear end lubricated by grease, and an oil pipe in the middle2) Self heat dissipation structur
Product Name: Metering PumpPlace of Origin: ChinaIt is diaphragm type metering pump. It is driven by a motor, which is suitable for precise measuring of the liquid.The material can be used according t
Mp Magnetic pump is a full-sealed pump, for motor connecting shaft and impeller areseparately equipped with magnetic material, they attract each other and coupled.Its unnecessary to fit with tradition
Mp Magnetic pump is a full-sealed pump, for motor connecting shaft and impeller areseparately equipped with magnetic material, they attract each other and coupled.Its unnecessary to fit with tradition
Features:1) Pump and motor share a common shaft, making pump running smoothly2) Cancel the conventional shaft seal to avoid leakage3) Use of sliding bearing instead of the rolling bearing, making oper
Features:1) Pump body, cover, impeller and the components in contact with medium are made of PVDF or reinforced polypropylene2) Without coupling3) Teflon bellows externally mounted anticorrosive mecha
Features:1) Pump body, cover, impeller and the components in contact with medium are made of PVDF or reinforced polypropylene2) Without coupling3) Teflon bellows externally mounted anticorrosive mecha
Features:The flow contacting parts are made of stainless steel, aluminum alloy and cast iron. While the diaphragm can be NBR, viton, neoprene and PTFE.Application:They are functioned to take out and s
Product Name: QBY Type Pneumatic Diaphragm PumpModel Number: 2007AL0029Place of Origin: ChinaFeatures:The flow contacting parts are made of stainless steel, aluminum alloy and cast iron.While the diap
Likewise in category "Hydraulic and Pneumatic Components":