Address: Lixiang Village, Tangshi Town(Inside Zhangjiagang Economic Development Zone), Zhangjiagang, Jiangsu, China (Mainland) Zip: 21561
Phone: +86-512-58592811
Separating and Cutting Machine
Major technical specifications:1) Applicable materials: BOPP, PET, CPE and PVC2) Max. feeding diameter: φ600mm, and max. width of feedingmaterials: 420mm3) Slitting width: 80~1,300mm4) The upper and lower shafts for cutting materials are detachable5) Mechanical speed: 0~160m/m6) Limit tolerance of rolling surface: ≤±1mm7) Total power: about 5kW, and power voltage: 380V±10%Major configuration:1) This is the horizontal separating and cutting machine, and the rollingand rolling-up lie on the same side2) The main shaft drive adopts the synchronic wheel and belt (top brandin China)3) Upper rolling tensile strength is 5kg magnetic powder clutch; lowerrolling tensile strength is 5kg magnetic powder clutch4) Rolling-up tensile strength is 10kg magnetic powder clutch, cooled by water5) The cutter is manually adjusted, equipped with 12 flat knives, and RMBis charged for round knives; (10 round knife stands)6) The main shaft roller pneumatic control, and the drive roller guide usesthe dynamic balance jump treatment7) Two upper and lower rolling-up pneumatic core shafts8) The power of the waste end blowing machine is 0.75kW (China top brand)9) 4 pressing rollers (rubber roller)10) Two sets of spring regulated ball bearing slipping shafts. (RMB1,500 ischarged for pneumatic control)11) The feeding determines the length and position automatically12) One set of rolling-up prick steel pipe shaftControl part:1) The general control is equipped with independent control box2) The main motor is equipped with one set of 4kW splitting motor3) The deviation is rectified by the switch, and the photo-electricity is TaiwanFutai KS-C2G4) The deviation is controlled by ball bearing pole and TDY90 motor5) The rolling and rolling-up are controlled by tensile strength potentiometer,subject to free adjustment (manual control)6) The whole machine adopts the imported KTM-DT30S programmablecontroller (PLC)7) It is equipped with wiring diagram and operation manual8) Size: 2,500 x 1,800 x 1,500mm and weight: 3,000kg
This machine adopts the computer-man interface to control, with two-way synchronic roller feeding. Its heat sealing is fully in the state of no tensile strength. The wind-blowing cooling device has en
This machine can make two specifications of HDPE, LDPE, PVC and other colored printing bags simultaneously, with color man-computer interface, PC and double feeding motor control.
This machine adopts the computer-man interface to control, with two-way synchronic roller feeding. Its heat sealing is fully in the state of no tensile strength. The wind-blowing cooling device has en
This machine can make two specifications of HDPE, LDPE, PVC and other colored printing bags simultaneously, with color man-computer interface, PC and double feeding motor control.
Product Name: Computer Control Heat Sealing Bag Making MachinePlace of Origin: ChinaThis machine is a 2-in-1 machine. It can be used for cutting and packing of hot fusiblematerial including BOPP, OPP,
Major technical specifications:1) Applicable materials: BOPP, PET, CPE and PVC2) Max. feeding diameter: φ700mm, and max. width of feedingmaterials: 1,300mm3) Slitting width: 100~1,300mm4) The uppe
This machine is intended for manufacturing PE, PP and other plastic film point broken coiling double-use bottom sealing bag-making machines, whose coiling stand and main machine can be used independen
help
Add to favorite
Favorite products
