1. It applies a hydraulic drive and pre-pressing unit and it is safe and reliable.2. Two operation modes, that is, manual and automatic modes, are available.3. Operating knife edge lengths come in three specifications, that is, 800mm, 1000mm and 1200mm.4. This machine is equipped with an acceleration system. The cutting speed is one time higher than that of other machines of the same type when the machine is at its max. opening. The machine is uniquely developed in China.5. The motor power is reduced by 40%, compared with other machines of the same type. A great energy saving is achieved.
1. It applies a hydraulic drive and pre-pressing unit and it is safe and reliable.2. Two operation modes, that is, manual and automatic modes, are available.3. Operating knife edge lengths come in thr
This machine can pack the materials with big elasticity, such as wool, cotton and polyester fiber and reduce their volume, so as to reduce transport volume, save transport cost and improve profit for
1. This machine applies a hydraulic drive and it is properly designed. It is convenient in installation, simple in operation and reliable in use.2. The door is opened hydraulically to remove the packa
This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal state. The material volumes are reduced dramatically and more materials can
This machine pulls and draws alloy steel bottle flans with high strength from a wall thickness 4.5mm down to 2.5-3mm in cold conditions. This machine applies a hydraulic drive and operates stably. The
This machine is a big-scale waste metal processing equipment that is suitable for handling a large amount of waste steel. It is used to cold compress the waste metal materials with a thickness below 6
This type of machine can cold compresses the residue waste metal materials with a thickness below 4-6mm into rectangle lumps, which not only reduces transportation and smelting cost, but also improves
This machine is used to cold compress and pack various residue waste metal materials, waste steel chip and waste oil bucket with a thickness below 2-3mm, in order to facilitate storage or discharging
This machine cold compresses the light thin materials of dismounted automobile shells, waste buckets, waste copper and aluminum into rectangle lumps. The package is discharged from the front and secon
help
Add to favorite
Favorite products
