Address: No.181 Canghai Road, Jiangdong, Ningbo, Zhejiang, China (Mainland)
Phone: +86-574-87912280
Cast AlNiCo Magnets
Excellent temperature stability, high residual induction, and relatively high energiescharacterize Alnico materials, composed primarily of alloys of Aluminum, Nickel, and Cobalt. They are manufactured through either a casting or sintering process.Cast magnets may be manufactured in complex shapes, such as horseshoes, not possible with other magnet materials. Sintered Alnicos offer slightly lower magneticproperties but better mechanical characteristics than cast Alnicos.Cast Alnico 5 is the most commonly used of all the cast Alnicos. This material is used extensively in rotating machinery, meters, instruments, sensing devices, and holding applications, to name a few.Alnico is hard and brittle. Machining or drilling can not therefore be accomplishedby ordinary methods. Holes are usually cored in at the foundry, and magnets arecast close to final size and then finish machined tocloser tolerances.Alnico has a low coercive force, and is easily demagnetized if not handled with care.For optimum performance of Alnico 5, the magnetic length should be approximately5 times the pole diameter or equivalent diameter. For example, a 0.250" diameter magnet should be about 1.250" long.Because of its higher coercivity, Alnico 8 may be used in shorter lengths and indisc shapes.
Excellent temperature stability, high residual induction, and relatively high energiescharacterize Alnico materials, composed primarily of alloys of Aluminum, Nickel, and Cobalt. They are manufactured
In bonded Hard Ferrtie material range,flexible rubber magnet is mostly common used.Flexible materials offer the product designer a uniquely desirable combination of properties at lower cost than other
In bonded Hard Ferrtie material range,flexible rubber magnet is mostly common used.Flexible materials offer the product designer a uniquely desirable combination of properties at lower cost than other
Features:1) Various shapes and sizes available2) Made by screen print or offset print3) Both screen print and offset print can be imprinted withCMYK 4 colors in paper card or PVC4) Glossy coating or m
Features:1) Various shapes and sizes available2) Made by screen print or offset print3) Both screen print and offset print can be imprinted withCMYK 4 colors in paper card or PVC4) Glossy coating or m
Features:1) Made of iron, steel with sintered ferrite, sintered NdFeB and castalnico gluing together2) Sintered ferrite pot magnets and cast alnico pot magnets maintaintheir magnetic properties under
Features:1) Made of iron, steel with sintered ferrite, sintered NdFeB and castalnico gluing together2) Sintered ferrite pot magnets and cast alnico pot magnets maintaintheir magnetic properties under
help
Add to favorite
Favorite products
