Semi-Automatic Electric Welder For Automotive Battery

It is quipped with ``MIYACHI`` or ``CHUO`` welding controller. It is a hydraulic system and pressure of grips can be adjusted from 0-30 kg/cm2. It is equipped the water cooling system. Cycle duration: approx. 30sec. per one battery.

Add to Basket

Web address

Other goods of this manufacturer :

Semi-Automatic Heat Sealing Machine
	Automatic lift up the cover by both of gripping mechanism and suction mechanism, so that the cover can be lift steadily. Capacity:90 pcs/hr Temperature range: 0-450C. It is easy to change the tooling

Automatic Air Leak Testing/Coding Machine
	Testing cycle : 20-30 sec. This machine is adopted with the digital meter. This machine is suitable to test the battery from 12N24-N200. It is easy for operation and maintenance.

Automatic Aluminum Foil Sealing Machine For Automotive Battery
	It provides fully automatic heat sealing of the aluminum foil on the vent of battery so that the element groups will not be oxidized before pour the acid liquid info the battery. Cycle:15-20sec. Temp

Automatic Grid Frame Casting Machine
	This machine can cast 8-16 panels per minute. There are 3 sets of heater in lead melting furance. This machine is suitable for casting grid of lead-calcium alloy or lead-antimony for small sealed bat

Automatic Heat Sealing Machine For Automotive Battery
	Automatically lift up the cover by both of gripping mechanism and suction mechanism, so that the cover can be lift steadily. Capacity: N70 below battery type : 210 pcs/hr N100 up battery type : 120 p

Automatic Pasting Machine
	It is equipped with the vacuum type material feeding construction. The sulfuric acid rplling system at the rear section of main machine is movable. The pasing speed is 100-135 pcs of grid panel(140mm

Automatic Weld Condition Checking Machine
	It is suitable to test all types of motorcycle battery. It is easy to change the test tooling(mold). Production capacity :300-360 pcs/hr. It is equipprd with the system of auto-stop of no feeding and

Automatic Welding Machine
	It is eauipped with SCR system if high quality and capacity. It is equipped with ``MIYACGI`` or ``CHUO`` welding controller. The cycle duration is approx. 360 pcs/hr for 6V battery. 240 pcs/hr for 12

Fully Automatic Casting Machine For Lead Components
	The cycle time will be 10-18 seconds. This machine is controlled bynthe PLC control system. This machine is suitable to cast the lead components of SB-PB or CA-PB such as lead connector, lead pole.