|
|
Sterilizing Device
Technical requirements:1) Except the grinding board, the surface of stainless steel parts is polished and willnot scratch2) Welding seam on external surface (except bottom welding seam) is grinded andpolished, and other welding seams can be polished after acid cleaning3) Before assembly, the surface of each part is cleaned. The frame is injected withwater through the top water sealing slot, and the bottom base bolts are adjustedto calibrate the level4) Error of horizontality of net bracket shall be less than 0.5/1,000, and the deviationof diagonal line of the head wheel spindle and end wheel spindle shall be less than1.5mm5) Transportation belt entering into and going out of the tank have A, B, C, D beltsthat are determined according to the production taskTechnical parameters:1) Max. sterilizing temperature: 95°C2) Sterilizing mesh belt width: 1,500mm3) Sterilizing length: 4,000mm4) Pre-cooling length: 1,000mm5) Cooling length: 4,000mm6) Conveying speed: 0.11 – 0.51m/min7) Hot water cycle flow: 15m3/h8) Warm water cycle flow: 15m3/h9) Steam pressure: 0.4MPa10) Power: 7.47kW
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
