Application:1) TQA1 series crane console (for short: console) be applied for main circuitand control circuit in AC 50HZ rated working voltage 380V and DC ratedworking voltage 220V, and working with crane protective cabinet or controlscreen, starting, timing, commuting and braking motors2) Setting term:a) Altitude does not exceed 2,000m the ambient temperature between +40,to-5. Average temperature less than +35 during 24 hoursb) The air is clean, the relative humidity does not surpass 50% under +40maximum temperatures, in compares under the low temperature the relativehumidity may enhance (for example when 20 is 90%), and the permissionbut possibly accidentally produces as a result of the temperature changein the product surface mildly congeals the dewc) The power supply electrical network quality is qualified; the coil in voltageundulation scope does not surpass the rated voltage value 10%e) The vertical installment, the gradient does not surpass 5, must install reliably,should not produce vertically in the main engine work beats with the levelmigration
Application:1) TQA1 series crane console (for short: console) is applied for main circuit andcontrol circuit in AC 50HZ, rated voltage 380V and DC rated voltage 220V, andcan be worked with crane prote
Product Name: Linkage ControllerModel Number: TQA1Place of Origin: ChinaApplication:1) TQA1 series crane console (for short: console) is applied for main circuit andcontrol circuit in AC 50HZ, rated v
This control unit is mainly used in AC 50HZ, 60HZ, 380V and DC 220V control circuit, controls the hoist crane carrier and starting, timing, commutating, braking the motors in the similar electricity c
This control unit is mainly used in AC 50HZ, 60HZ, 380V and DC 220V control circuit, controls the hoist crane carrier and starting, timing, commutating, braking the motors in the similar electricity c
This control unit is mainly used in AC 50HZ, 60HZ, 380V and DC 220V control circuit, Controls the hoist crane carrier and starting, timing, commutating, braking the motors in the similar electricity c
Product Name: Linkage Controller (DQT1)Model Number: DQT1Place of Origin: ChinaThis control unit is mainly used in AC 50HZ, 60HZ, 380V and DC 220V control circuit,Controls the hoist crane carrier and
XLKT8 series master controller is suitable for the circuit of 380V AC and below,220V DC and below, and used in the equipment of steel turning, steel pulling out,steel pushing and pressing.
LK18 series cam master controller is suitable for the electric transmission devicesof 50Hz 380V AC and 220V DC, and used for the remote control of control stationby changing the control circuit.
LK17 series master controller adopts the IEC standard, with reasonable structureand reliable work.LK17 series master controller, with rated heat current of 10A, is suitable for 50Hz380V AC and below,