Axial piston fixed motors displacement motors, Series 20, are of swash plate design with a present constant displacement, and they are intended for closed circuit operation.The output speed is proportional to the flow rate of the supplied fluid.The output torque is proportional to the difference between high and low-pressure sides of the fluid circuit.The direction of motor shaft rotation depends on the fact; into which port is LED the pressure fluid.
PV 3K 50 is an axial piston pump with variable displacement. Rotor of this pump is driven by shaft which is supported on 2 roller bearings. Inside of the rotor there are moving 5 pistons parallel with
Axial piston variable displacement pumps, Series 20 are of swash plate design with variable displacement which, in turn, is determined by the swash plate angle and is adjustable between zero and maxim
PVK units are axial piston pumps of slipper design. Rotor of this pump is driven by shaft which is supported by 2 roller bearings. Inside of the rotor, there are moving 9, hydrostatically balanced, pi
MF3K-51 units are axial piston motors of slipper design. Rotor of this pump is driven by shaft which is supported by 2 roller bearings. Inside of the rotor, there are moving 9, hydrostatically balance
Axial piston motors with variable displacement series 3K-10 are of swash plate design. They are designated for usage in mobile and industrial applications.
help
Add to favorite
Favorite products
