1. The bench accord with the standard of "iec 60736:1982 testing equipment for electrical energy meter", "iec 62053"2. Close-link and ordinary calibration both can be used, ordinary calibration can be used to test single/three phase active and reactive energy meter (up to 0.5 class), close-link calibration can be used to test single/three phase active and reactive energy meter (up to 1 class)3. The bench can test the converted quantity which is caused by negative phase, voltage unbalance, harmonic wave and so on4. The bench can auto-calibrate starting, no load, basic error and calibration tolerance and 24h deflection.5. Close-link calibration is using insulate current transformer and suitable for close-link energy meter.6. The bench is using the standard power meter with comparison technology to offer the test the error of energy meters.7. The bench is using the error processor system to calculate the error of each energy meter by the sub-error system which can be connected by the internal rs485.8. The same specification but different constant energy meter can be tested at one time.9. For the installed pick-up equipment, can offer 3 ranges adjustment. It is also can be accepted the signal for both round-style energy meter and digital LED energy meter.10. The bench can choose to operate by keyboard or PC which is very convenient. The working status of bench can be seen very clear and easy operation.11. The bench is using the testing software complied with windows98/2000/XP which can auto-testing different energy meters.12. The software can realize the data from energy meter for statistics, search and management. It also can connect with on-line management for up load the data13. The energy meter hanging rack is made by aluminum compound. The whole device configuration is a reasonable design and nice outfit.
1. Suitable design, good figure. The frame for meters and the body frame are fully made by special aluminum alloy. The table board is composed of fireproofing and heat-proof fiber materials. The whole
1. Electricity consumption measurement:Measure the active kWh and store the data. Can store the data of last month and month before last.2. Max. Demand measurement:In a designated period (one month),
Main features:1. High accuracy class. The accuracy can reach class 0.2s. Wide overload times, the accuracy class can be better than 0.5s within the range of 10 times overload.2.16m data storage memory
Features:1. Record and display the electricity Cost ( $)2. Check and display the current voltage (V), current (A), frequency (Hz),Current power consumption (W), highest power consumption (Hi W), lowes
Features:1. Record and display the electricity Cost ( $)2. Check and display the current voltage (V) , current (A) , frequency (Hz) ,Current power consumption (W) , highest power consumption (Hi W) ,
Features:1. Record and display the electricity Cost ( $)2. Check and display the current voltage (V) , current (A) , frequency (Hz) ,Current power consumption (W) , highest power consumption (Hi W) ,
Product description:The energy usage monitor uses soc technology (only one chip which finish adc, mcu and LCD driver functions). It displays volts, amps, watts, hz, va, time. It can be widely used in
Application:Type SY1040 three phase DIN rail watt-hour meter is a kind of new style three phase electronic watt-hour meter, the meter completely accord with relevant technical requirements of class 1
1. Accuracy class:0.05/0.1class2. Frequency range:45Hz-65Hz3. Input voltage:10V-450V4. Input current: Terminal input:0-5A (1A)Clamp type meter input:0-5A or 0-800A5. Measuring accuracy:Voltage:0.05% o
Likewise in category "Measuring Instrument and Devices":
help
Add to favorite
Favorite products
