Address: Jingkou, Daoxu Town, Shangyu, Zhejiang, China (Mainland) Zip: 312368
Phone: +86-575-2042805
Indoor Metal Shell Draw-Out Switch Device
KYN28A(GZS1) type indoor metal shell draw-out switch device is the complete electricity device of 3-10kV 3-phase AC 50Hz single-generatrix partial turnoff system, and is mainly used for electricity distribution, electricity of twice transformer and the startup of large-scale electromotor for the use of control protection and examination. The switch device meets the standards of IEC298 and GB3906, and can avoid pulling and pushing breaker handle car with charge for preventing from miss-open/close breaker, open/close breaker, miss-entering into partial room, with electricity preventing from miss-closing the interlock function of grounding switch with electricity. It is equipped with VS1 vacuum breaker or imported VD4 vacuum breaker of HS vacuum breaker in Fuji electric machine.
KYN28A(GZS1) type indoor metal shell draw-out switch device is the complete electricity device of 3-10kV 3-phase AC 50Hz single-generatrix partial turnoff system, and is mainly used for electricity di
JYN1-40.5 interval mobile AC metal close switch device is the indoor protection type whole set of electricity distribution of 3-phase AC 50Hz single-generatrix system, and is used to accept and distri
JYN1-40.5 interval mobile AC metal close switch device is the indoor protection type whole set of electricity distribution of 3-phase AC 50Hz single-generatrix system, and is used to accept and distri
KYN61-40.5 AC Mobile Switch Equipment With Metal Shell (AMCM) is equipped with 40.5KV three-phase AC 50 Hz. It is mainly applied to currency collection and distribution of control room of enterprise,
MNS low voltage switchgear is the product manufactured according to technique transferred from Switzerland ABB. This switchgear is suitable for AC 50-60Hz, 660V and less (rated working voltage) system
MNS low voltage switchgear is the product manufactured according to technique transferred from Switzerland ABB. This switchgear is suitable for AC 50-60Hz, 660V and less (rated working voltage) system
GCK1A low-voltage draw-out switchgear device can be used for the control over the power distribution and electromotor with 3-phase four-wire system or 3-phase five-wire system, and a voltage of 380V a
GCK1A low-voltage draw-out switchgear device can be used for the control over the power distribution and electromotor with 3-phase four-wire system or 3-phase five-wire system, and a voltage of 380V a
GGD low-voltage fixed switch facility is applicable to the distributing systems with an alternating frequency of 50Hz, a rated working voltage of 380V and a rated working current of 3,150A used in the
help
Add to favorite
Favorite products
