Address: #507,5f, Hi-beras Bldg,1146, Joong-dong, Wonmi-gu, Bucheon-city, Gyeonggi-do, South Korea
Phone: +82-32-3283170
Pipe Fittings
* Types of productsSocketValve Socket90 Elbow45 ElbowScrew ElbowTeeTee ReducerScrew TeeReducerScrew ReducerFixing SocketCap======================================* Theory of operation1. A tube is inserted into the fitting, it passes Jaw Holder, stainless steel Jaws, Spring, and then through two O-Rings until it reaches to Tube stop.2. Jaw with four teeth opens out in sliding the tube in, while it grabs onto the tube when the tube reaches to the Tube Stop.3. Two O-rings compress between the wall of the fitting and the tube, which prevent leakage. O-Ring1 first block leakage and O-Ring2 also block any possible leakage.4. As the tube reaches to the tube stop and JAW press down to the surface of the tube and grab the tube. When fluid starts to run through in the tube, pressure comes from inside of the fitting to outside.5. The pressure pushes Spring back through the two O-Rings, which press down Jaws and ultimately increase the grabbing power of Jaws. The stronger the pressure is, the more grabbing power Jaws generates.6. If push Jaw Holder forward, Jaw is pushed up to the space between the wall of the fitting and Jaw Holder and open up the teeth. It releases the tube.=====================================* Compatibility tableStainless Steel Tube Copper Tube---------------------------------------------------------------------JIS G3448 JIS G3459 ASTM B88SU O.D A O.D A O.D T---------------------------------------------------------------------13 15.88 - - 15 15.88 1.0220 22.22 15 21.70 20 22.22 1.1425 28.58 20 27.20 25 28.58 1.2730 34.00 25 34.00 32 34.92 1.440 42.70 32 42.70 40 41.28 1.5250 48.60 40 48.60 50 53.98 1.7860 60.50 50 60.50 65 66.68 2.0375 76.30 65 76.30 80 79.38 2.29O.D : Outside Dimension T : ThicknessC : Compatibility : Compatible
**the price mentioned above is for p40t-1* to enlarge the above picture, please click it.* for more information, please contact below person;David chae / manager of trade dept.
Indexable High Speed End mill CutterD50 ~ D125* to enlarge the above picture, please click it.* For more information, please contact below person;David Chae / Manager of Trade Dept.
* Indexable Ball Nose CutterR10~ R25* to enlarge the above picture, please click it.* For more information, please contact below person;David Chae / Manager of Trade Dept.
** Indexable High Speed DrillD12.5 ~ D80* to enlarge the above picture , please click it.* For more information, please contact below person;David Chae / Manager of Trade Dept.
* Max drill is able to drill in high speed from 5 times of speed upto 8 times, as for large hole drilling.* is supplied without pilot drill.Pilot drill should be ordered sapately.* for more informatio
Likewise in category "Sanitary, water supply and sewerage tubing":
help
Add to favorite
Favorite products
