Address: 88 Baoqing Road, Baoding, Hebei, China (Mainland) Zip: 071000
Phone: +86-312-2191616
Ductile Iron Pipe
Features:1) The pipes are produced with good straightness, even wall thickness, remarkablemechanical prosperities and firmly sticking internal and external coating layer2) Flexible push-in joint and rubber gasket are used resulting in convenientinstallation of pipelines3) The pipes are manufactured according to the international standard ISO2531 (E)and EN 5454) The pipes are push-in joint type, external coating zinc + bitumen painting, internallined the cement mortar5) The gasket materials are the NR, NBR, EPDM, etc.Ductile iron pipes for water conveyance:Product standards: BS EN545:2002, ISO2531:19981) Pipes are supplied in standard length of 5.5/6.0m, short length pipes as perrespective standards can be supplied2) In addition to Class K9 pipes, Newton supplies K7, K8, K10, and K12 classes ofpipes3) The thickness can be determined by the formula-e=K (0.5+0.001DN)4) PFA (allowable operating pressure) is the internal pressure, exclusive of surge, thata component can safely withstand in permanent service5) PMA (allowable maximum operating pressure) is the maximum internal pressure,including surge, that a component can withstand for a relatively short duration,when either fixed above ground level or laid and back-filled underground in order tomeasure the integrity and leak tightness of the pipe.Ductile iron pipes for sewerage application:Product standard: BS EN598:2002Quality checks at every stage of manufacturing:1) Strict selection of raw material is an indispensable requirement to produce qualityductile iron pipes and fittings. Newton endeavors to achieve `Quality right thefirst time` with strict quality control on raw material selection and procurement.2) Newton produces liquid metal suited to manufacture ductile iron pipes. The liquidmetal is further processed in induction furnaces. It is then treated with magnesiumfor modularization and transferred to the centrifugal spun casting machines.3) The pipes are heat treated, zinc coated, hydrostatically tested, tested, cementmortar lined and finished with a layer of bitumen coating.4) The in-process inspection and quality control at all points during the productioncycle is strictly maintained and documented as ISO9001 quality systems.Process and testing:1) Blast furnace (Analysis of raw materials test )2) Mg treatment (Micro & chemical composition test)3) Pipe spinning (Temperature test)4) Heat treatment (Micro structure; Flattening test)5) Zinc coating (Thickness testing)6) Dimensional checks (Thickness & Dia. testing)7) Hydraulic test (Pressure test)8) Internal lining (Thickness testing)9) External coating (Thickness test)Main technical data for ductile iron pipes:1) Product standard: ISO2531:1998, BS EN 545:20022) Class: K93) Type of joints: push-in flexible jointMechanical properties:Wall thickness:Hydrostatic test:
Features:1) The ductile iron pipe with anti-corrosive ceramic epoxy lining is our latest developedproduct2) The pipe is produced by spraying the ceramic epoxy paint on the spinning pipe, andafter curi
Product Name: Ductile Iron Pipe with Ceramic Epoxy LiningPlace of Origin: ChinaFeatures:1) The ductile iron pipe with anti-corrosive ceramic epoxy lining is our latest developedproduct2) The pipe is p
Flanged pipes and fittings:1) Product standards: BS-EN-545:2002 / ISO531:19982) Allowable pressures for ductile iron flanged pipes and fittings: fitting with oneflange such as double socket3) Tees wit
Product Name: Flanged Pipes and FittingsPlace of Origin: ChinaFlanged pipes and fittings:1) Product standards: BS-EN-545:2002 / ISO531:19982) Allowable pressures for ductile iron flanged pipes and fit
Features:1) The pipe fittings are manufactured according to the international standardISO 2531 (E) and EN 5452) The pipe fittings are produced with external zinc coating and bitumen painting,internal
Product Name: Flanged SocketPlace of Origin: ChinaFeatures:1) The pipe fittings are manufactured according to the international standardISO 2531 (E) and EN 5452) The pipe fittings are produced with ex
Product Name: Flanged SpigotPlace of Origin: ChinaFeatures:1) The pipe fittings are manufactured according to the international standardISO 2531 (E) and EN 5452) The pipe fittings are produced with ex
Features:1) The pipe fittings are manufactured according to the international standardISO 2531 (E) and EN 5452) The pipe fittings are produced with external zinc coating and bitumen painting,internal
Product Name: Ductile Iron PipePlace of Origin: ChinaFeatures:1) The pipes are produced with good straightness, even wall thickness, remarkablemechanical prosperities and firmly sticking internal and
Likewise in category "Sanitary, water supply and sewerage tubing":
help
Add to favorite
Favorite products
