Address: Room 1702, No.2123, Pudong Road, Pudong New Area, Shanghai, China (Mainland)
Phone: +86-21-68537850
Aluminum Foil
We can supply aluminum foils mainly for food packing and air conditioners.Component Wt. %Al Min 99.35Cu Max 0.05Mg Max 0.05Component Wt. %Mn Max 0.05Other, each Max 0.03Si+Fe Max 0.65Component Wt. %Ti Max 0.06V Max 0.05Zn Max 0.1Density: 2.705 g/ccMechanical Properties :Hardness, Brinell 45 45 500 kg load with 10 mm ball. Calculated value.Tensile Strength, Ultimate 75 MPa 10900 psiTensile Strength, Yield 30 MPa 4350 psiElongation at Break 2.4 % 2.4 % FoilModulus of Elasticity 69 GPa 10000 ksi In Tension; In Aluminum alloys, the compressive modulus is typically 2% greater than the tensile modulusPoisson`s Ratio 0.33 0.33 Estimated from trends in similar Al alloys.Shear Modulus 26 GPa 3770 ksi Estimated from similar Al alloys.Shear Strength 100 MPa 14500 psi Calculated value.Electrical Properties :Electrical Resistivity 2.8e-006 ohm-cm
8011 o aluminum foil for food packing, medecine used, aircondition used. The thickness is 10micron from 200micron. Foil for food packing is 10micron to 30micron. And the thicknes from 30-60micron is f
1) Non-poisonous2) Odorless3) Excellent tight performance and very easy peel4) Super damp-proof function5) Environmental protection material and can be recycled6) Good sealing strength, with flat and
1) Non-poisonous2) Odorless3) Excellent tight performance and very easy peel4) Super damp-proof function5) Environmental protection material and can be recycled6) Good sealing strength, with flat and
We can supply aluminum foils mainly for food packing and the length can be 3mto 150m and the thickness is10 micron to 25 micron. The width is 300 to450mm and we can provide SGS certification.Packing:A
Alloy 8011 and temper is soft, thickness: 10micron to 25micron, width is from 250-1200mm, and the length can be as your request. This foil is mainly for food packing.We can supply the jumbo rolls and
help
Add to favorite
Favorite products
