L'anglais Le Russe L'allemand    |    Aide
   Ajouter á l'élu    Les marchandises remises
   
Description du produit
Matériel Chimique & Produits /  Matériel Collant / 
Information sur le fabricant
Société :
Guangzhou Usilicone chemical material Co.,Ltd
 
Adresse :
Room 1206, Science Avenue 97, Luogang District
 
Téléphone :
+86-769-88888312

.

Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min) (Adjustable)Curing Time3~5(h)After The Curing Hardness 40~50(Shore A)Dielectric Strength ≥20(kV/mm)Dielectric Constant3.12(1.2MHz)Thermal Conductivity ≥0.6[W/m.k]Volume Resistivity  ≥1.0×1014(Ω·cm)Specific Gravity  1.56±0.02(g/cm3)Flammability RatingUL94 V-0   •20kg/set(A10kg+B10kg), packaging with bucket.               
RéserverRéserver un produit site du fabricantSite du fabricant




D'autres marchandises de ce producteur :
inverters silicone potting sealant with waterproof ()
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min)
LED bar silicone potting sealant with damp-proof ()
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min)
LED bulb silicone sealant ()
INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so
LED power modules silicone potting sealant with non-toxic ()
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min)
low viscosity silicone sealant ()
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
non-corrosion for materials silicone sealant ()
1. Features         ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
non-corrosion silicone sealant ()
After the curingTensile strength≥1.5(MPa) Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35~45(Shore A) Temperature Range-60~200(℃)Volume resistivity2.2×10
quake-proof silicone sealant for solar power ()
1. Features         ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola
RTV-1 Sealant with excellent thermal conduction ()
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it

"Matériel Collant":
THERMO POWDER
THERMO POW...
A-B glue, epoxy, resin, acrylic glue, anaerobic adhesive
A-B glue, ...
Low Pressure Epoxy Crack Injection System
Low Pressu...
Epoxy Adhesives
Epoxy Adhe...
Hot Melt Adhesive (All Propose)
Hot Melt A...
Tensioner Guide
Tensioner ...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com