These bushings have the type of SF-1 sliding bearing, SF-1B bronze based bearing, SF-1P reciprocating motion bearing, SF-1S stainless steel bush, SF-1T hydraulic bush, SF-2X boundary lubricating beari

SF-2 boundary lubrication bushings are based on composite material with 3 firmly bonded layers: Steel as backing, sintered bronze spherical powder as interlayer and modified POM as lining layer. The b

The bushes of SF-1 is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mix

The bushes of SF-1 is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mix

This bushes is a kind of bushes wrapped by bronze strip. The bronze is of particulate formulation with high specific gravity and on its surface may be incorporated with spherical or diamond shaped ind

The bushes of FU, the bronze powder is mold pressed under high pressure and than sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum

The bushes of FU, the bronze powder is mold pressed under high pressure and than sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum

These Solid Bushings use high grade metal alloys as their base material and have finely finished surface with holes in which a specially formulated solid lubricant is embedded. The Lubricant cover up