The bushes of SF-1 is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer. The bushes is of low friction coefficient, anti-corrosion and can be used without oil, or only a trace of oil so needed. Moreover, it is of low cost low vibration and low nisei, compact and light. SF-1 bushes is widely applied in various sliding articles of different king of machinery such as textile machinery, tobacco machinery, hydraulic vehicles, automobiles, agriculture and forests machinery and so on. We can produce all sizes and kinds of this bushes, also by clients requests! The specification of this bushes as follows: Load capacity: 140N/MM2 Temperature limit: -195oC-+270oC Sped limit: 4.5M/s Friction clef: 0.04-0.20 PV limit (dry): 3.6N/mm2. M/s PV limit (oil): 50N/mm2. M/s.
This bushes is a kind of bushes wrapped by bronze strip. The bronze is of particulate formulation with high specific gravity and on its surface may be incorporated with spherical or diamond shaped ind
The bushes of FU, the bronze powder is mold pressed under high pressure and than sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum
The bushes of FU, the bronze powder is mold pressed under high pressure and than sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum
These Solid Bushings use high grade metal alloys as their base material and have finely finished surface with holes in which a specially formulated solid lubricant is embedded. The Lubricant cover up
This bushes is a kind of steel-lead bronze alloys based bearing, which is embedded with particular formulation of solid lubricants. Owing to the high strength, high load capacity and the spirally dist
These bushings have the type of SF-1 sliding bearing, SF-1B bronze based bearing, SF-1P reciprocating motion bearing, SF-1S stainless steel bush, SF-1T hydraulic bush, SF-2X boundary lubricating beari
SF-2 boundary lubrication bushings are based on composite material with 3 firmly bonded layers: Steel as backing, sintered bronze spherical powder as interlayer and modified POM as lining layer. The b
The bushes of SF-1 is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mix
Aide
Ajouter á l'élu
Les marchandises remises
