Address: No.30-3, Lane 393, Yuantong Rd., Zhonghe City, Taipei County 235, Taiwan, Taipei, Taiwan
Phone: +886--227422715
Layer 3 24 + 2 FX Port Routing Switch
AN-R-GE9026 Ethernet Switch is a new generation data traffic production. This Switch uses appropriative BROADCOM Switch-Chip as the core, providing 10/100Mbps wire-speed data switch, combining Layer-3 switch function.AN-R-GE9026 Ethernet Switch is a dedicated Ethernet switch featuring high performance Layer-2/Layer-3 switching for construction of the campus network or department of a large enterprise and for intelligent community network access. It also can be used to connect the Broad Band section, cooperating with special software (options: Authentication and Count).Support WEB,TELNET,SNMP and local serial managementproviding 10/100Mbps wire-speed data switch, combining Layer-3 switch function.Backplane :15GbpsMac address :8KWire speed on all port: Full-wire speed (full-duplex) operation on all portsTransmission Method: Store-and-forwardlatency :throughput: 6.6mpps(64 bytes packets)support port mirroring,super vlan, flow control
Media converter complies with IEEE802.3 standards, It is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and
AN-CH02 can support 12 function card,1 network management card, and 2 power supply card and can be used as centrally located SNMP managed chassis for fiber optical muxes and E1 to Ethernet inverse mul
LC - LC single mode patchcord, any lenght available, simple or duplex, APC or UPC polishA flexible piece of cable terminated at both ends with plugs. Used for interconnecting circuits on a patchboard,
The AN-FM-RS232 family are standalone and rack mountable fiber 1, 2 or 8 x RS-232 modems available in a number of different models, with AC or DC power supplies built-in.The AN-FM-RS232 family of mode
SC - ST patchcord / single mode SC - ST single mode patchcord, any lenght available, simplex or duplex, APC or UPC polishApplications:Fiber optical networksData transmission networksComputer networksC
The AN-130/150 converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and100 Base Fx Fast Ethernet using WDM (wave division multiplexing technology)
AN-CH04, full configuration consists of 1 SNMP card+12 function card+2 power supply module (redundant). Support our media converter series, making centrally located SNMP managed chassis solution.Do yo
A flexible piece of cable terminated at both ends with plugs. Used for interconnecting circuits on a patchboard, in a wiring closet, or at the work area. ST - ST multi mode, UPC/APC polish, any lenght
A flexible piece of cable terminated at both ends with plugs. Used for interconnecting circuits on a patchboard, in a wiring closet, or at the work area. ST - ST multi mode/ single mode, UPC/APC polis
Likewise in category "Additional Equipment for Wire Networks":
help
Add to favorite
Favorite products
