French |

Description

Industrial Equipment / Other Industrial Equipment / Turn-Key, Industrial Plants and Machinery /

Zoom in

Send Request

Producer information

Company:
YUEN-SUN MACHINERY CO., LTD.

Address:
NO. 11, LANE 30, LUNG CHUNG ST., LUNG TAN LI, YUNG KANG CITY

Phone:
+886-6-2323582

Aluminum Billet Heat Furnace -Chain Type

The machine is used for heating the billets and then send the billets into aluminum extrusion press.

Other goods of this manufacturer :

Aluminum Billet Heat Furnace- Direct fire Type
	Introduction: Type: Tunnel Continuous type Method: Both sides direct fire heating Advantage: Temperature rising speed is fast. It is less fuel, equal temperature, stable, exact temperature. It fits in

Aluminum Billet Saw
	Introduction: 1.This equipment can put a lot of billets on the storage table and continuously cut billets. 2.This equipment uses PLC electricity automatic control and it is easy to operate. 3.Cooling

Aluminum Extrusion Press
	Horizontal Single Movement Aluminum Extrusion Press There are different inches of press such as 3.5"(580US TON), 4"(690US TON),5"(930US TON), 5.5"(1100US TON), 6"(1450US TON), 7"(1800US TON), 8"(2200U

Aluminum Grille Piercing Rolling Machine
	Aluminium-Grille Piercing Rolling Machine: Motor: 15HP X 4P Speed: 1 minute = 6 M Piercing: 300 mm width = 30 groove

Automatic Handling System -Belt Type
	This equipment consists of Initial table, Roller Sleeve Raise/lower conveyer (Adjustable speed), Run Out transfer table (belt type), Cooling table (belt type), Stretcher, Stretcher Transfer table (bel

Automatic Handling System- Flat Transfer Type
	This equipment consists of Initial table, Roller Sleeve Raise/lower conveyer (Adjustable speed), Run Out transfer table (Flat Transfer Type), Cooling table (Flat Transfer Type), Stretcher, Stretcher T

Automatic Puller
	The puller operates in coordination with 420 US Ton~4400 US TON extrusion press to produce various special industrial aluminum products. It is easy to operate and retrench manpower. This machine is ma

Die Heat Furnace
	The machine is used for heating the dies.

Grille Hauler
	Grille Hauler: Motor: 10HP X 4P Speed: 1 minute = 1.5 M Pulling Grille: 6.5 M Length X 1.3 M

Likewise in category "Turn-Key, Industrial Plants and Machinery":