Specifications:ApplicationProtection and control of circuit against overload and short circuit, in building installation-such as houses, offices, commercial complex, motor system(d curve) and industrial installation-for switching, control, protection and regulation of electrical circuits. Also in switchgear panels, railway and marine application.Technical dataStandard: Iec60898, gb10963Rated current(in): Up to 63aRated voltage(un): AC 230(240)/400(415)vPoles:1p,2p,3p,4pB curve: The magnetic releases operate between 3 and 5 inC curve: The magnetic releases operate between 5 and 10 inD curve: The magnetic releases operate between 10 and 20 inConnection capacity: Rigid conductor 25mm2 flexible conductor 16mm2Ultimate short-circuit breaking capacity(inc):10000a endurance:On load:2000 cyclesOff load:2000 cyclesOperating conditionCircumstance temperature -5 ~ +40, average temperature not exceeding 35.Altitude above sea level less than 2000 M.Humidity not exceeding 50% at 40 and not exceeding 90% at 25.Installation class II or iii.Pollution class II.Installation method din rail mounting type.Product shall be installed vertically at the place where there shall be no severe impact and vibration. The product is switched on when the handle is at upper position.Saftey approval: CE, semko, cb
JVL1-63 III Residual Current Circuit Breaker provide the function of isolation switching and earth leakage protection of electrical circuits. And also provide the indirect protection of the operator`s
Application scope:Protection against the effects of earth leakage overload and short circuit currents.2P switching of ph&N, Phase only protected against overloads and short circuits.In commercial, ind
DZ108(3VE) circuit breaker is suitable in the circuit of AC 50Hz or 60Hz, voltage up to 660V, current from 0.1A to 63A. It is used to prevent motors with small capacity and circuit from overload and s
Application scope:For use as switch disconnectors in all types of circuit as difined in the 16th edition of the iee wiring regulations.Standard:Iec60947-3Main technical parameters:Type: Jvd2-125Number
Application scope:Modualar contactors essential for control and automation duties in dwellings, offices, shops and hospitals, they are particularly suitable for switching lighting installations, heat
Application scope:Be suitable for circuit with rated voltage at 220v or 380v and frequency at 50hz. Provides the function of controlling, distributing and circuit protection of overload, earth leakage
Application scope:Be applicable to circuit with rated voltage not exceeding 400V, rated frequency 50Hz and rated current not exceeding 63A. Protection and control of circuit against overload and short
Application scope:Be applicable to circuit with rated voltage 230V/400V, rated frequency 50Hz/60Hz and rated current not exceeding 125A. Protection and control of circuit against overload and short ci
help
Add to favorite
Favorite products
