|
|
|
INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so
|
| |
|
|
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min)
|
| |
|
|
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
|
|
|
|
|
1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
|
| |
|
|
After the curingTensile strength≥1.5(MPa) Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35~45(Shore A) Temperature Range-60~200(℃)Volume resistivity2.2×10
|
| |
|
|
1. Features ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola
|
|
|
|
|
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
|
| |
|
|
INSTRUCTIONS1、A, B glue mix according to the weight of the 1:1 ratio,and only after the row of bubble it can be used.In order to improve the bubble velocity,empty after row and bubble in the
|
| |
|
|
NOTE There are some materials, such as chemical additives, curing agent and plasticizer can inhibit the curing of our glue.These materials include: •Org
|
|