English Russe Französische    |    Hilfe
   Zu Favoriten     Dem Warenkorb hinzugefügte Favoriten
   
Beschreibung der Ware
Chemische Materialien & Produkte /  Klebende Materialien / 
Informationen über den produzenten
Firma:
Guangzhou Usilicone chemical material Co.,Ltd
 
Adresse:
Room 1206, Science Avenue 97, Luogang District
 
Telefon:
+86-769-88888312

.

NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.Before The Curing  Appearance Translucent And Half FlowRelative Density0.95~1.05 (g/cm3)Tack Free Time  ≤90 (min)Completely Cure Time3~7(d)After the curing  Hardness35~45 (Shore A)Tensile Strength ≥1.0 (MPa)Break Elongation≥50(%)The Temperature Range -60~200 (℃)Volume Resistivity  ≥1.0×1014 (Ω·CM)Dielectric Strength≥18 (kV/·mm)Sample: 1kg/tin (which may be decided according to user's need) 
In den WarenkorbIn den Warenkorb Internetauftritt des HerstellersInternetauftritt des Herstellers




Andere Waren dieses Produzenten :
 ()
1. Features         ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
 ()
After the curingTensile strength≥1.5(MPa) Elongation At Break≥150(%)Shear strength≥2.0(MPa)Hardness35~45(Shore A) Temperature Range-60~200(℃)Volume resistivity2.2×10
 ()
1. Features         ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola
 ()
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
 ()
INSTRUCTIONS1、A, B glue mix according to the weight of the 1:1 ratio,and only after the row of bubble it can be used.In order to improve the bubble velocity,empty after row and bubble in the
 ()
NOTE There are some materials, such as chemical additives, curing agent and plasticizer can inhibit the curing of our glue.These materials include:         •Org
 ()
Before the curing Appearance                                                
 ()
 Effectively prolong the service life of electronic componentsSilicone sealant has superior thermal conduction and bonding property.it not only can fixed the electroniccomponents, make
 ()
Before the curing Appearance                                                

"Klebende Materialien":
cold patch
cold patch
TRANSFER ADHESIVE
TRANSFER A...
injection cartridge ( chemical mortar ) Epoxy Acrylate Resin
injection ...
EPOXY RESIN
EPOXY RESI...
Single component polyurethane joint sealant
Single com...
TRANSFER ADHESIVE
TRANSFER A...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com