Информация о производителе
Компания: AD-NET TECHNOLOGY CO LTD |
|
Адрес: No.30-3, Lane 393, Yuantong Rd., Zhonghe City, Taipei County 235, Taiwan, Taipei, Taiwan |
|
Телефон: +886--227422715 |
|
.
AN-4E1-ETH mux provides conversion from 1 to 4 E1 channels to Ethernet interface. Supports 1 to 4 E1 channels setting, it can detect the number of E1 channel and select available channel.If you need transmit you LAN over 4 x E1 lines, using some E1 G.703 access network - then this is your right solution! You will get 8 Mbit/s buy multiplexing 4 x E1 lines...The AN-4E1-ETH inverse multiplexers transmit up to 8 Mbps channel over multiple E1 links. They bridge the gap between E1 and E3, allowing bridges and routers to operate at their fastest rates. The AN-4E1-ETH have a built-in 10/100 Ethernet bridge with VLAN support for LAN-to-LAN applications over 4 E1 links. The AN-4E1-ETH fully meets all of the E1 specifications including G.703, G.704, G.706, G.732 and G.823. The unit features diagnostic capabilities for performing remote loopback tests.AN-4E1-ETH features:- Made according with IEEE 802.3, support 10Base-T, 100Base-T.- Support flexible setting of 1 to 4 E1 channels, auto detect the number of E1 channels and time-delay, select available E1 channels when reset.- Provide 2 loop functions: local E1 loop, remote E1 loop.- Ethernet transmission transparent,support AUTO-MDIX, straight and crossover auto-adapt.- Can transmit super-long frame of IEEE 802.1Q, support Ethernet exchanger with VLAN function.- Support E1 channel hot plug, and auto detect available E1 channels.- Support reset remote system from local system.4 E1 can have 10 ms time-delay, CRC alarm limitation can auto insulate bad-quality transmit channel by configuration, and is single direction insulation. when one direction error rate over limitation, cut only this direction, the other direction not affected. ( the two directions need not symmetry.)- Power supply option: AC220V, DC-48V. The positive and negative terminal can be exchanged for DC-48V, easy for installation and maintenance.- Network manager interface use SNMPOrdering informationAN-4E1-ETH /AC 8xE1-ETH interface convertor, 75/120, 220VAN-4E1-ETH /DC/48 8xE1-ETH interface convertor, 75/120, DC-48VAN-4E1-ETH /DC/24 8xE1-ETH interface convertor, 75/120, DC+24VAnd most important - even if 1 of E1s goes down... our mux reacts immediatelly by rebalancing load on left ones!Ask more info now...
336x280 banner
|
336x280 banner
|
|